diff --git a/ble/services/EddystoneConfigService.h b/ble/services/EddystoneConfigService.h deleted file mode 100644 index 977edac..0000000 --- a/ble/services/EddystoneConfigService.h +++ /dev/null @@ -1,540 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_ -#define SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_ - -#include "mbed.h" -#include "ble/BLE.h" -#include "ble/services/EddystoneService.h" - -#define UUID_URI_BEACON(FIRST, SECOND) { \ - 0xee, 0x0c, FIRST, SECOND, 0x87, 0x86, 0x40, 0xba, \ - 0xab, 0x96, 0x99, 0xb9, 0x1a, 0xc9, 0x81, 0xd8, \ -} - -static const uint8_t UUID_URI_BEACON_SERVICE[] = UUID_URI_BEACON(0x20, 0x80); -static const uint8_t UUID_LOCK_STATE_CHAR[] = UUID_URI_BEACON(0x20, 0x81); -static const uint8_t UUID_LOCK_CHAR[] = UUID_URI_BEACON(0x20, 0x82); -static const uint8_t UUID_UNLOCK_CHAR[] = UUID_URI_BEACON(0x20, 0x83); -static const uint8_t UUID_URI_DATA_CHAR[] = UUID_URI_BEACON(0x20, 0x84); -static const uint8_t UUID_FLAGS_CHAR[] = UUID_URI_BEACON(0x20, 0x85); -static const uint8_t UUID_ADV_POWER_LEVELS_CHAR[] = UUID_URI_BEACON(0x20, 0x86); -static const uint8_t UUID_TX_POWER_MODE_CHAR[] = UUID_URI_BEACON(0x20, 0x87); -static const uint8_t UUID_BEACON_PERIOD_CHAR[] = UUID_URI_BEACON(0x20, 0x88); -static const uint8_t UUID_RESET_CHAR[] = UUID_URI_BEACON(0x20, 0x89); -extern const uint8_t BEACON_EDDYSTONE[2]; - -/** -* @class EddystoneConfigService -* @brief Eddystone Configuration Service. Can be used to set URL, adjust power levels, and set flags. -* See https://github.com/google/eddystone -* -*/ -class EddystoneConfigService -{ -public: - /** - * @brief Transmission Power Modes for UriBeacon - */ - enum { - TX_POWER_MODE_LOWEST, - TX_POWER_MODE_LOW, - TX_POWER_MODE_MEDIUM, - TX_POWER_MODE_HIGH, - NUM_POWER_MODES - }; - - static const unsigned ADVERTISING_INTERVAL_MSEC = 1000; // Advertising interval for config service. - static const unsigned SERVICE_DATA_MAX = 31; // Maximum size of service data in ADV packets - - typedef uint8_t Lock_t[16]; /* 128 bits */ - typedef int8_t PowerLevels_t[NUM_POWER_MODES]; - - // There are currently 3 subframes defined, URI, UID, and TLM -#define EDDYSTONE_MAX_FRAMETYPE 3 - static const unsigned URI_DATA_MAX = 18; - typedef uint8_t UriData_t[URI_DATA_MAX]; - - // UID Frame Type subfields - static const size_t UID_NAMESPACEID_SIZE = 10; - typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE]; - static const size_t UID_INSTANCEID_SIZE = 6; - typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE]; - - // Eddystone Frame Type ID - static const uint8_t FRAME_TYPE_UID = 0x00; - static const uint8_t FRAME_TYPE_URL = 0x10; - static const uint8_t FRAME_TYPE_TLM = 0x20; - - static const uint8_t FRAME_SIZE_TLM = 14; // TLM frame is a constant 14Bytes - static const uint8_t FRAME_SIZE_UID = 20; // includes RFU bytes - - struct Params_t { - // Config Data - bool isConfigured; // Flag for configuration being complete, - // True = configured, false = not configured. Reset at instantiation, used for external callbacks. - uint8_t lockedState; - Lock_t lock; - uint8_t flags; - PowerLevels_t advPowerLevels; // Current value of AdvertisedPowerLevels - uint8_t txPowerMode; // Firmware power levels used with setTxPower() - uint16_t beaconPeriod; - // TLM Frame Data - uint8_t tlmVersion; // version of TLM packet - bool tlmEnabled; - float tlmBeaconPeriod; // how often to broadcat TLM frame, in seconds. - // URI Frame Data - uint8_t uriDataLength; - UriData_t uriData; - bool uriEnabled; - float uriBeaconPeriod; // how often to broadcast URIFrame, in seconds. - // UID Frame Data - UIDNamespaceID_t uidNamespaceID; // UUID type, Namespace ID, 10B - UIDInstanceID_t uidInstanceID; // UUID type, Instance ID, 6B - bool uidEnabled; - float uidBeaconPeriod; // how often to broadcast UID Frame, in seconds. - }; - - /** - * @param[ref] ble - * BLEDevice object for the underlying controller. - * @param[in/out] paramsIn - * Reference to application-visible beacon state, loaded - * from persistent storage at startup. - * @param[in] defaultAdvPowerLevelsIn - * Default power-levels array; applies only if the resetToDefaultsFlag is true. - */ - EddystoneConfigService(BLEDevice &bleIn, - Params_t ¶msIn, - PowerLevels_t &defaultAdvPowerLevelsIn, - PowerLevels_t &radioPowerLevelsIn) : - ble(bleIn), - params(paramsIn), // Initialize URL Data - defaultAdvPowerLevels(defaultAdvPowerLevelsIn), - radioPowerLevels(radioPowerLevelsIn), - initSucceeded(false), - resetFlag(), - defaultUidNamespaceID(), // Initialize UID Data - defaultUidInstanceID(), - defaultUidPower(defaultAdvPowerLevelsIn[params.txPowerMode]), - uidIsSet(false), - defaultUriDataLength(), - defaultUriData(), - defaultUrlPower(defaultAdvPowerLevelsIn[params.txPowerMode]), - urlIsSet(false), - tlmIsSet(false), - lockedStateChar(UUID_LOCK_STATE_CHAR, ¶ms.lockedState), - lockChar(UUID_LOCK_CHAR, ¶ms.lock), - uriDataChar(UUID_URI_DATA_CHAR, params.uriData, 0, URI_DATA_MAX, - GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE), - unlockChar(UUID_UNLOCK_CHAR, ¶ms.lock), - flagsChar(UUID_FLAGS_CHAR, ¶ms.flags), - advPowerLevelsChar(UUID_ADV_POWER_LEVELS_CHAR, ¶ms.advPowerLevels), - txPowerModeChar(UUID_TX_POWER_MODE_CHAR, ¶ms.txPowerMode), - beaconPeriodChar(UUID_BEACON_PERIOD_CHAR, ¶ms.beaconPeriod), - resetChar(UUID_RESET_CHAR, &resetFlag) { - // set eddystone as not configured yet. Used to exit config before timeout if GATT services are written to. - params.isConfigured = false; - - lockChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::lockAuthorizationCallback); - unlockChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::unlockAuthorizationCallback); - uriDataChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::uriDataWriteAuthorizationCallback); - flagsChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback); - advPowerLevelsChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback); - txPowerModeChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::powerModeAuthorizationCallback); - beaconPeriodChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback); - resetChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback); - - static GattCharacteristic *charTable[] = { - &lockedStateChar, &lockChar, &unlockChar, &uriDataChar, - &flagsChar, &advPowerLevelsChar, &txPowerModeChar, &beaconPeriodChar, &resetChar - }; - - GattService configService(UUID_URI_BEACON_SERVICE, charTable, sizeof(charTable) / sizeof(GattCharacteristic *)); - - ble.addService(configService); - ble.onDataWritten(this, &EddystoneConfigService::onDataWrittenCallback); - } - - /** - * @brief Start EddystoneConfig advertising. This function should be called - * after the EddystoneConfig constructor and after all the frames have been added. - * - * @paramsP[in] resetToDefaultsFlag - * Applies to the state of the 'paramsIn' parameter. - * If true, it indicates that paramsIn is potentially - * un-initialized, and default values should be used - * instead. Otherwise, paramsIn overrides the defaults. - */ - void start(bool resetToDefaultsFlag){ - INFO("reset to defaults flag = %d", resetToDefaultsFlag); - if (!resetToDefaultsFlag && (params.uriDataLength > URI_DATA_MAX)) { - INFO("Reset to Defaults triggered"); - resetToDefaultsFlag = true; - } - - if (resetToDefaultsFlag) { - resetToDefaults(); - } else { - updateCharacteristicValues(); - } - - setupEddystoneConfigAdvertisements(); /* Setup advertising for the configService. */ - initSucceeded = true; - } - - /* - * Check if eddystone initialized successfully - */ - bool initSuccessfully(void) const { - return initSucceeded; - } - - /* - * @brief Function to update the default values for the TLM frame. Only applied if Reset Defaults is applied. - * - * @param[in] tlmVersionIn Version of the TLM frame being used - * @param[in] advPeriodInMin how long between TLM frames being advertised, this is measured in minutes. - * - */ - void setDefaultTLMFrameData(uint8_t tlmVersionIn = 0, float advPeriodInSec = 60){ - DBG("Setting Default TLM Data, version = %d, advPeriodInMind= %f", tlmVersionIn, advPeriodInSec); - defaultTlmVersion = tlmVersionIn; - TlmBatteryVoltage = 0; - TlmBeaconTemp = 0x8000; - TlmPduCount = 0; - TlmTimeSinceBoot = 0; - defaultTlmAdvPeriod = advPeriodInSec; - tlmIsSet = true; // flag to add this to eddystone service when config is done - } - - /* - * @brief Function to update the default values for the URI frame. Only applied if Reset Defaults is applied. - * - * @param[in] uriIn url to advertise - * @param[in] advPeriod how long to advertise the url for, measured in number of ADV frames. - * - */ - void setDefaultURIFrameData(const char *uriIn, float advPeriod = 1){ - DBG("Setting Default URI Data"); - // Set URL Frame - EddystoneService::encodeURL(uriIn, defaultUriData, defaultUriDataLength); // encode URL to URL Formatting - if (defaultUriDataLength > URI_DATA_MAX) { - return; - } - INFO("\t URI input = %s : %d", uriIn, defaultUriDataLength); - INFO("\t default URI = %s : %d ", defaultUriData, defaultUriDataLength ); - defaultUriAdvPeriod = advPeriod; - urlIsSet = true; // flag to add this to eddystone service when config is done - } - - /* - * @brief Function to update the default values for the UID frame. Only applied if Reset Defaults is applied. - * - * @param[in] namespaceID 10Byte Namespace ID - * @param[in] instanceID 6Byte Instance ID - * @param[in] advPeriod how long to advertise the URL for, measured in the number of adv frames. - * - */ - void setDefaultUIDFrameData(UIDNamespaceID_t *namespaceID, UIDInstanceID_t *instanceID, float advPeriod = 10){ - //Set UID frame - DBG("Setting default UID Data"); - memcpy(defaultUidNamespaceID, namespaceID, UID_NAMESPACEID_SIZE); - memcpy(defaultUidInstanceID, instanceID, UID_INSTANCEID_SIZE); - defaultUidAdvPeriod = advPeriod; - uidIsSet = true; // flag to add this to eddystone service when config is done - } - - /* Start out by advertising the configService for a limited time after - * startup; and switch to the normal non-connectible beacon functionality - * afterwards. */ - void setupEddystoneConfigAdvertisements() { - const char DEVICE_NAME[] = "eddystone Config"; - - ble.clearAdvertisingPayload(); - - ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE); - - // UUID is in different order in the ADV frame (!) - uint8_t reversedServiceUUID[sizeof(UUID_URI_BEACON_SERVICE)]; - for (unsigned int i = 0; i < sizeof(UUID_URI_BEACON_SERVICE); i++) { - reversedServiceUUID[i] = UUID_URI_BEACON_SERVICE[sizeof(UUID_URI_BEACON_SERVICE) - i - 1]; - } - ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS, reversedServiceUUID, sizeof(reversedServiceUUID)); - ble.accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_TAG); - ble.accumulateScanResponse(GapAdvertisingData::COMPLETE_LOCAL_NAME, reinterpret_cast(&DEVICE_NAME), sizeof(DEVICE_NAME)); - ble.accumulateScanResponse( - GapAdvertisingData::TX_POWER_LEVEL, - reinterpret_cast(&defaultAdvPowerLevels[EddystoneConfigService::TX_POWER_MODE_LOW]), - sizeof(uint8_t)); - - ble.setTxPower(radioPowerLevels[params.txPowerMode]); - ble.setDeviceName(reinterpret_cast(&DEVICE_NAME)); - ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED); - ble.setAdvertisingInterval(ADVERTISING_INTERVAL_MSEC); - } - - /* - * This function actually impliments the Eddystone Beacon service. It can be called with the help of the wrapper function - * to load saved config params, or it can be called explicitly to reset the eddystone beacon to hardcoded values on each reset. - * - */ - void setupEddystoneAdvertisements() { - DBG("Switching Config -> adv"); - // Save params to storage - extern void saveURIBeaconConfigParams(const Params_t *paramsP); /* forward declaration; necessary to avoid a circular dependency. */ - saveURIBeaconConfigParams(¶ms); - INFO("Saved Params to Memory.") - // Setup Eddystone Service - static EddystoneService eddyServ(ble, params.beaconPeriod, radioPowerLevels[params.txPowerMode]); - // Set configured frames (TLM,UID,URI...etc) - if (params.tlmEnabled) { - eddyServ.setTLMFrameData(params.tlmVersion, params.tlmBeaconPeriod); - } - if (params.uriEnabled) { - eddyServ.setURLFrameEncodedData(params.advPowerLevels[params.txPowerMode], (const char *) params.uriData, params.uriDataLength, params.uriBeaconPeriod); - } - if (params.uidEnabled) { - eddyServ.setUIDFrameData(params.advPowerLevels[params.txPowerMode], - (uint8_t *)params.uidNamespaceID, - (uint8_t *)params.uidInstanceID, - params.uidBeaconPeriod); - } - // Start Advertising the eddystone service. - eddyServ.start(); - } - -private: - /* - * This callback is invoked when a GATT client attempts to modify any of the - * characteristics of this service. Attempts to do so are also applied to - * the internal state of this service object. - */ - void onDataWrittenCallback(const GattWriteCallbackParams *writeParams) { - uint16_t handle = writeParams->handle; - - if (handle == lockChar.getValueHandle()) { - // Validated earlier - memcpy(params.lock, writeParams->data, sizeof(Lock_t)); - // Set the state to be locked by the lock code (note: zeros are a valid lock) - params.lockedState = true; - INFO("Device Locked"); - } else if (handle == unlockChar.getValueHandle()) { - // Validated earlier - params.lockedState = false; - INFO("Device Unlocked"); - } else if (handle == uriDataChar.getValueHandle()) { - params.uriDataLength = writeParams->len; - memset(params.uriData, 0x00, URI_DATA_MAX); // clear URI string - memcpy(params.uriData, writeParams->data, writeParams->len); // set URI string - params.uriEnabled = true; - INFO("URI = %s, URILen = %d", writeParams->data, writeParams->len); - } else if (handle == flagsChar.getValueHandle()) { - params.flags = *(writeParams->data); - INFO("flagsChar = 0x%x", params.flags); - } else if (handle == advPowerLevelsChar.getValueHandle()) { - memcpy(params.advPowerLevels, writeParams->data, sizeof(PowerLevels_t)); - INFO("PowerLevelsChar = %4x", params.advPowerLevels); - } else if (handle == txPowerModeChar.getValueHandle()) { - params.txPowerMode = *(writeParams->data); - INFO("TxPowerModeChar = %d", params.txPowerMode); - } else if (handle == beaconPeriodChar.getValueHandle()) { - params.beaconPeriod = *((uint16_t *)(writeParams->data)); - INFO("BeaconPeriod = %d", params.beaconPeriod); - - /* Re-map beaconPeriod to within permissible bounds if necessary. */ - if (params.beaconPeriod != 0) { - bool paramsUpdated = false; - if (params.beaconPeriod < ble.getMinAdvertisingInterval()) { - params.beaconPeriod = ble.getMinAdvertisingInterval(); - paramsUpdated = true; - } else if (params.beaconPeriod > ble.getMaxAdvertisingInterval()) { - params.beaconPeriod = ble.getMaxAdvertisingInterval(); - paramsUpdated = true; - } - if (paramsUpdated) { - ble.updateCharacteristicValue(beaconPeriodChar.getValueHandle(), reinterpret_cast(¶ms.beaconPeriod), sizeof(uint16_t)); - } - } - } else if (handle == resetChar.getValueHandle()) { - INFO("Reset triggered from Config Service, resetting to defaults"); - resetToDefaults(); - } - updateCharacteristicValues(); - params.isConfigured = true; // some configuration data has been passed, on disconnect switch to advertising mode. - } - - /* - * Reset the default values. - */ - void resetToDefaults(void) { - INFO("Resetting to defaults"); - // General - params.lockedState = false; - memset(params.lock, 0, sizeof(Lock_t)); - params.flags = 0x10; - memcpy(params.advPowerLevels, defaultAdvPowerLevels, sizeof(PowerLevels_t)); - params.txPowerMode = TX_POWER_MODE_LOW; - params.beaconPeriod = (uint16_t) defaultUriAdvPeriod * 1000; - - // TLM Frame - params.tlmVersion = defaultTlmVersion; - params.tlmBeaconPeriod = defaultTlmAdvPeriod; - params.tlmEnabled = tlmIsSet; - - // URL Frame - memcpy(params.uriData, defaultUriData, URI_DATA_MAX); - params.uriDataLength = defaultUriDataLength; - params.uriBeaconPeriod = defaultUriAdvPeriod; - params.uriEnabled = urlIsSet; - - // UID Frame - memcpy(params.uidNamespaceID, defaultUidNamespaceID, UID_NAMESPACEID_SIZE); - memcpy(params.uidInstanceID, defaultUidInstanceID, UID_INSTANCEID_SIZE); - params.uidBeaconPeriod = defaultUidAdvPeriod; - params.uidEnabled = uidIsSet; - - updateCharacteristicValues(); - } - - /* - * Internal helper function used to update the GATT database following any - * change to the internal state of the service object. - */ - void updateCharacteristicValues(void) { - ble.updateCharacteristicValue(lockedStateChar.getValueHandle(), ¶ms.lockedState, 1); - ble.updateCharacteristicValue(uriDataChar.getValueHandle(), params.uriData, params.uriDataLength); - ble.updateCharacteristicValue(flagsChar.getValueHandle(), ¶ms.flags, 1); - ble.updateCharacteristicValue(beaconPeriodChar.getValueHandle(), - reinterpret_cast(¶ms.beaconPeriod), sizeof(uint16_t)); - ble.updateCharacteristicValue(txPowerModeChar.getValueHandle(), ¶ms.txPowerMode, 1); - ble.updateCharacteristicValue(advPowerLevelsChar.getValueHandle(), - reinterpret_cast(params.advPowerLevels), sizeof(PowerLevels_t)); - } - -private: - void lockAuthorizationCallback(GattWriteAuthCallbackParams *authParams) { - if (params.lockedState) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION; - } else if (authParams->len != sizeof(Lock_t)) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH; - } else if (authParams->offset != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET; - } else { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } - } - - void unlockAuthorizationCallback(GattWriteAuthCallbackParams *authParams) { - if ((!params.lockedState) && (authParams->len == sizeof(Lock_t))) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } else if (authParams->len != sizeof(Lock_t)) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH; - } else if (authParams->offset != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET; - } else if (memcmp(authParams->data, params.lock, sizeof(Lock_t)) != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION; - } else { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } - } - - void uriDataWriteAuthorizationCallback(GattWriteAuthCallbackParams *authParams) { - if (params.lockedState) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION; - } else if (authParams->offset != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET; - } else { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } - } - - void powerModeAuthorizationCallback(GattWriteAuthCallbackParams *authParams) { - if (params.lockedState) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION; - } else if (authParams->len != sizeof(uint8_t)) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH; - } else if (authParams->offset != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET; - } else if (*((uint8_t *)authParams->data) >= NUM_POWER_MODES) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED; - } else { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } - } - - template - void basicAuthorizationCallback(GattWriteAuthCallbackParams *authParams) { - if (params.lockedState) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION; - } else if (authParams->len != sizeof(T)) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH; - } else if (authParams->offset != 0) { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET; - } else { - authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; - } - } - - BLEDevice &ble; - Params_t ¶ms; - Ticker timeSinceBootTick; - Timeout switchFrame; - // Default value that is restored on reset - PowerLevels_t &defaultAdvPowerLevels; // this goes into the advertising frames (radio power measured at 1m from device) - PowerLevels_t &radioPowerLevels; // this configures the power levels of the radio - uint8_t lockedState; - bool initSucceeded; - uint8_t resetFlag; - bool switchFlag; - - //UID Default value that is restored on reset - UIDNamespaceID_t defaultUidNamespaceID; - UIDInstanceID_t defaultUidInstanceID; - float defaultUidAdvPeriod; - int8_t defaultUidPower; - uint16_t uidRFU; - bool uidIsSet; - - //URI Default value that is restored on reset - uint8_t defaultUriDataLength; - UriData_t defaultUriData; - int8_t defaultUrlPower; - float defaultUriAdvPeriod; - bool urlIsSet; - - //TLM Default value that is restored on reset - uint8_t defaultTlmVersion; - float defaultTlmAdvPeriod; - volatile uint16_t TlmBatteryVoltage; - volatile uint16_t TlmBeaconTemp; - volatile uint32_t TlmPduCount; - volatile uint32_t TlmTimeSinceBoot; - bool tlmIsSet; - - ReadOnlyGattCharacteristic lockedStateChar; - WriteOnlyGattCharacteristic lockChar; - GattCharacteristic uriDataChar; - WriteOnlyGattCharacteristic unlockChar; - ReadWriteGattCharacteristic flagsChar; - ReadWriteGattCharacteristic advPowerLevelsChar; - ReadWriteGattCharacteristic txPowerModeChar; - ReadWriteGattCharacteristic beaconPeriodChar; - WriteOnlyGattCharacteristic resetChar; -}; - -#endif // SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_ diff --git a/ble/services/EddystoneService.h b/ble/services/EddystoneService.h deleted file mode 100644 index 55c7172..0000000 --- a/ble/services/EddystoneService.h +++ /dev/null @@ -1,651 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2015 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef SERVICES_EDDYSTONEBEACON_H_ -#define SERVICES_EDDYSTONEBEACON_H_ - -#include "ble/BLE.h" -#include "mbed.h" -#include "CircularBuffer.h" -static const uint8_t BEACON_EDDYSTONE[] = {0xAA, 0xFE}; - -//Debug is disabled by default -#if 0 -#define DBG(MSG, ...) printf("[EddyStone: DBG]" MSG " \t[%s,%d]\r\n", \ - ## __VA_ARGS__, \ - __FILE__, \ - __LINE__); -#define WARN(MSG, ...) printf("[EddyStone: WARN]" MSG " \t[%s,%d]\r\n", \ - ## __VA_ARGS__, \ - __FILE__, \ - __LINE__); -#define ERR(MSG, ...) printf("[EddyStone: ERR]" MSG " \t[%s,%d]\r\n", \ - ## __VA_ARGS__, \ - __FILE__, \ - __LINE__); -#else // if 0 -#define DBG(x, ...) //wait_us(10); -#define WARN(x, ...) //wait_us(10); -#define ERR(x, ...) -#endif // if 0 - -#if 0 -#define INFO(x, ...) printf("[EddyStone: INFO]"x " \t[%s,%d]\r\n", \ - ## __VA_ARGS__, \ - __FILE__, \ - __LINE__); -#else // if 0 -#define INFO(x, ...) -#endif // if 0 - -/** -* @class Eddystone -* @brief Eddystone Configuration Service. Can be used to set URL, adjust power levels, and set flags. -* See https://github.com/google/eddystone -* -*/ -class EddystoneService -{ -public: - enum FrameTypes { - NONE, - url, - uid, - tlm - }; - - static const int SERVICE_DATA_MAX = 31; // Maximum size of service data in ADV packets - - // There are currently 3 subframes defined, URI, UID, and TLM -#define EDDYSTONE_MAX_FRAMETYPE 3 - void (*frames[EDDYSTONE_MAX_FRAMETYPE])(uint8_t *, uint32_t); - static const int URI_DATA_MAX = 18; - typedef uint8_t UriData_t[URI_DATA_MAX]; - CircularBuffer overflow; - - // UID Frame Type subfields - static const int UID_NAMESPACEID_SIZE = 10; - typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE]; - static const int UID_INSTANCEID_SIZE = 6; - typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE]; - - // Eddystone Frame Type ID - static const uint8_t FRAME_TYPE_UID = 0x00; - static const uint8_t FRAME_TYPE_URL = 0x10; - static const uint8_t FRAME_TYPE_TLM = 0x20; - - static const uint8_t FRAME_SIZE_TLM = 14; // TLM frame is a constant 14Bytes - static const uint8_t FRAME_SIZE_UID = 20; // includes RFU bytes - - /** - * Set Eddystone UID Frame information. - * - * @param[in] power TX Power in dB measured at 0 meters from the device. Range of -100 to +20 dB. - * @param[in] namespaceID 10B namespace ID - * @param[in] instanceID 6B instance ID - * @param[in] RFU 2B of RFU, initialized to 0x0000 and not broadcast, included for future reference. - */ - void setUIDFrameData(int8_t power, - UIDNamespaceID_t namespaceID, - UIDInstanceID_t instanceID, - float uidAdvPeriodIn, - uint16_t RFU = 0x0000) { - if (0.0f == uidAdvPeriodIn) { - uidIsSet = false; - return; - } - if (power > 20) { - power = 20; - } - if (power < -100) { - power = -100; - } - - defaultUidPower = power; - memcpy(defaultUidNamespaceID, namespaceID, UID_NAMESPACEID_SIZE); - memcpy(defaultUidInstanceID, instanceID, UID_INSTANCEID_SIZE); - uidRFU = (uint16_t)RFU; // this is probably bad form, but it doesn't really matter yet. - uidAdvPeriod = uidAdvPeriodIn; - uidIsSet = true; // set toggle to advertise UID frames - } - - /* - * Construct UID frame from private variables - * @param[in/out] Data pointer to array to store constructed frame in - * @param[in] maxSize number of bytes left in array, effectively how much empty space is available to write to - * @return number of bytes used. negative number indicates error message. - */ - unsigned constructUIDFrame(uint8_t *Data, uint8_t maxSize) { - unsigned index = 0; - - Data[index++] = FRAME_TYPE_UID; // 1B Type - - if (defaultUidPower > 20) { - defaultUidPower = 20; // enforce range of vaild values. - } - if (defaultUidPower < -100) { - defaultUidPower = -100; - } - Data[index++] = defaultUidPower; // 1B Power @ 0meter - - DBG("UID NamespaceID = '0x"); - for (size_t x = 0; x < UID_NAMESPACEID_SIZE; x++) { // 10B Namespace ID - Data[index++] = defaultUidNamespaceID[x]; - DBG("%x,", defaultUidNamespaceID[x]); - } - DBG("'\r\n"); - - DBG("UID InstanceID = '0x"); - for (size_t x = 0; x< UID_INSTANCEID_SIZE; x++) { // 6B Instance ID - Data[index++] = defaultUidInstanceID[x]; - DBG("%x,", defaultUidInstanceID[x]); - } - DBG("'\r\n"); - - if (0 != uidRFU) { // 2B RFU, include if non-zero, otherwise ignore - Data[index++] = (uint8_t)(uidRFU >> 0); - Data[index++] = (uint8_t)(uidRFU >> 8); - } - DBG("construcUIDFrame %d, %d", maxSize, index); - return index; - } - - /** - * Set Eddystone URL Frame information. - * @param[in] power TX Power in dB measured at 0 meters from the device. - * @param[in] url URL to encode - * @param[in] urlAdvPeriodIn How long to advertise the URL frame (measured in # of adv periods) - * @return false on success, true on failure. - */ - bool setURLFrameData(int8_t power, const char *urlIn, float urlAdvPeriodIn) { - if (0.0f == urlAdvPeriodIn) { - urlIsSet = false; - return false; - } - encodeURL(urlIn, defaultUriData, defaultUriDataLength); // encode URL to URL Formatting - if (defaultUriDataLength > URI_DATA_MAX) { - return true; // error, URL is too big - } - defaultUrlPower = power; - urlAdvPeriod = urlAdvPeriodIn; - urlIsSet = true; - return false; - } - - /** - * Set Eddystone URL Frame information. - * @param[in] power TX Power in dB measured at 0 meters from the device. - * @param[in] encodedUrlIn Encoded URL - * @param[in] encodedUrlInLength Length of the encoded URL - * @param[in] urlAdvPeriodIn How long to advertise the URL frame (measured in # of adv periods) - * @return false on success, true on failure. - */ - bool setURLFrameEncodedData(int8_t power, const char *encodedUrlIn, uint8_t encodedUrlInLength, float urlAdvPeriodIn) { - if (0.0f == urlAdvPeriodIn) { - urlIsSet = false; - return false; - } - memcpy(defaultUriData, encodedUrlIn, encodedUrlInLength); - if (defaultUriDataLength > URI_DATA_MAX) { - return true; // error, URL is too big - } - defaultUrlPower = power; - defaultUriDataLength = encodedUrlInLength; - urlAdvPeriod = urlAdvPeriodIn; - urlIsSet = true; - return false; - } - - /* - * Construct URL frame from private variables - * @param[in/out] Data pointer to array to store constructed frame in - * @param[in] maxSize number of bytes left in array, effectively how much emtpy space is available to write to - * @return number of bytes used. negative number indicates error message. - */ - int constructURLFrame(uint8_t *Data, uint8_t maxSize) { - int index = 0; - Data[index++] = FRAME_TYPE_URL; // 1B Type - Data[index++] = defaultUrlPower; // 1B TX Power - for (int x = 0; x < defaultUriDataLength; x++) { // 18B of URL Prefix + encoded URL - Data[index++] = defaultUriData[x]; - } - DBG("constructURLFrame: %d, %d", maxSize, index); - return index; - } - - /* - * Set Eddystone TLM Frame information. - * @param[in] Version of the TLM beacon data format - * @param[in] advPeriod how often to advertise the TLM frame for (in minutes) - * @param batteryVoltage in milivolts - * @param beaconTemp in 8.8 floating point notation - * - */ - void setTLMFrameData(uint8_t version = 0, - float advPeriod = 60.0f, - uint16_t batteryVoltage = 0, - uint16_t beaconTemp = 0x8000, - uint32_t pduCount = 0, - uint32_t timeSinceBoot = 0) { - if (0.0f == advPeriod) { - tlmIsSet = false; - return; - } - TlmVersion = version; - TlmBatteryVoltage = batteryVoltage; - TlmBeaconTemp = beaconTemp; - TlmPduCount = pduCount; // reset - TlmTimeSinceBoot = timeSinceBoot; // reset - TlmAdvPeriod = advPeriod; - tlmIsSet = true; // TLM Data has been enabled - } - - /* - * Construct TLM frame from private variables - * @param[in/out] Data pointer to array to store constructed frame in - * @param[in] maxSize number of bytes left in array, effectively how much emtpy space is available to write to - * @return number of bytes used. negative number indicates error message. - */ - int constructTLMFrame(uint8_t *Data, uint8_t maxSize) { - uint32_t now = timeSinceBootTimer.read_ms(); - TlmTimeSinceBoot += (now - lastBootTimerRead) / 100; - lastBootTimerRead = now; - - int index = 0; - Data[index++] = FRAME_TYPE_TLM; // Eddystone frame type = Telemetry - Data[index++] = TlmVersion; // TLM Version Number - Data[index++] = (uint8_t)(TlmBatteryVoltage >> 8); // Battery Voltage[0] - Data[index++] = (uint8_t)(TlmBatteryVoltage >> 0); // Battery Voltage[1] - Data[index++] = (uint8_t)(TlmBeaconTemp >> 8); // Beacon Temp[0] - Data[index++] = (uint8_t)(TlmBeaconTemp >> 0); // Beacon Temp[1] - Data[index++] = (uint8_t)(TlmPduCount >> 24); // PDU Count [0] - Data[index++] = (uint8_t)(TlmPduCount >> 16); // PDU Count [1] - Data[index++] = (uint8_t)(TlmPduCount >> 8); // PDU Count [2] - Data[index++] = (uint8_t)(TlmPduCount >> 0); // PDU Count [3] - Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 24); // Time Since Boot [0] - Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 16); // Time Since Boot [1] - Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 8); // Time Since Boot [2] - Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 0); // Time Since Boot [3] - DBG("constructURLFrame: %d, %d", maxSize, index); - return index; - } - - /* - * Update the TLM frame battery voltage value - * @param[in] voltagemv Voltage to update the TLM field battery voltage with (in mV) - * @return nothing - */ - void updateTlmBatteryVoltage(uint16_t voltagemv) { - TlmBatteryVoltage = voltagemv; - } - - /* - * Update the TLM frame beacon temperature - * @param[in] temp Temperature of beacon (in 8.8fpn) - * @return nothing - */ - void updateTlmBeaconTemp(uint16_t temp) { - TlmBeaconTemp = temp; - } - - /* - * Update the TLM frame PDU Count field - * @param[in] pduCount Number of Advertisiting frames sent since powerup - * @return nothing - */ - void updateTlmPduCount(uint32_t pduCount) { - TlmPduCount = pduCount; - } - - /* - * Update the TLM frame Time since boot in 0.1s incriments - * @param[in] timeSinceBoot Time since boot in 0.1s incriments - * @return nothing - */ - void updateTlmTimeSinceBoot(uint32_t timeSinceBoot) { - TlmTimeSinceBoot = timeSinceBoot; - } - - /* - * Update advertising data - * @return true on success, false on failure - */ - bool updateAdvPacket(uint8_t serviceData[], unsigned serviceDataLen) { - // Fields from the Service - DBG("Updating AdvFrame: %d", serviceDataLen); - - ble.clearAdvertisingPayload(); - ble.setAdvertisingType(GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED); - ble.setAdvertisingInterval(100); - ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE); - ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, BEACON_EDDYSTONE, sizeof(BEACON_EDDYSTONE)); - ble.accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, serviceData, serviceDataLen); - - - return true; - } - - /* - * State machine for switching out frames. - * This function is called by the radioNotificationCallback when a frame needs to get swapped out. - * This function exists because of time constraints in the radioNotificationCallback, so it is effectively - * broken up into two functions. - */ - void swapOutFrames(FrameTypes frameType) { - uint8_t serviceData[SERVICE_DATA_MAX]; - unsigned serviceDataLen = 0; - //hard code in the eddystone UUID - serviceData[serviceDataLen++] = BEACON_EDDYSTONE[0]; - serviceData[serviceDataLen++] = BEACON_EDDYSTONE[1]; - - // if certain frames are not enabled, then skip them. Worst case TLM is always enabled - switch (frameType) { - case tlm: - // TLM frame - if (tlmIsSet) { - DBG("Swapping in TLM Frame: version=%x, Batt=%d, Temp = %d, PDUCnt = %d, TimeSinceBoot=%d", - TlmVersion, - TlmBatteryVoltage, - TlmBeaconTemp, - TlmPduCount, - TlmTimeSinceBoot); - serviceDataLen += constructTLMFrame(serviceData + serviceDataLen, 20); - DBG("\t Swapping in TLM Frame: len=%d", serviceDataLen); - updateAdvPacket(serviceData, serviceDataLen); - } - break; - case url: - // URL Frame - if (urlIsSet) { - DBG("Swapping in URL Frame: Power: %d", defaultUrlPower); - serviceDataLen += constructURLFrame(serviceData + serviceDataLen, 20); - DBG("\t Swapping in URL Frame: len=%d ", serviceDataLen); - updateAdvPacket(serviceData, serviceDataLen); - //switchFlag = false; - } - break; - case uid: - // UID Frame - if (uidIsSet) { - DBG("Swapping in UID Frame: Power: %d", defaultUidPower); - serviceDataLen += constructUIDFrame(serviceData + serviceDataLen, 20); - DBG("\t Swapping in UID Frame: len=%d", serviceDataLen); - updateAdvPacket(serviceData, serviceDataLen); - //switchFlag = false; - } - break; - default: - ERR("You have not initialized a Frame yet, please initialize one before starting a beacon"); - ERR("uidIsSet = %d, urlIsSet = %d, tlmIsSet = %d", uidIsSet, urlIsSet, tlmIsSet); - } - } - - /* - * Callback to swap in URL frame - */ - void urlCallback(void) { - DBG("urlCallback"); - if (false == advLock) { - advLock = true; - DBG("advLock = url") - frameIndex = url; - swapOutFrames(frameIndex); - ble.startAdvertising(); - } else { - // Someone else is broadcasting, toss it into the overflow buffer to retransmit when free - INFO("URI(%d) cannot complete, %d is currently broadcasting", url, frameIndex); - FrameTypes x = url; - overflow.push(x); - } - } - - /* - * Callback to swap in UID frame - */ - void uidCallback(void) { - DBG("uidCallback"); - if (false == advLock) { - advLock = true; - DBG("advLock = uid") - frameIndex = uid; - swapOutFrames(frameIndex); - ble.startAdvertising(); - } else { - // Someone else is broadcasting, toss it into the overflow buffer to retransmit when free - INFO("UID(%d) cannot complete, %d is currently broadcasting", uid, frameIndex); - FrameTypes x = uid; // have to do this to satisfy cont vs volatile keywords... sigh... - overflow.push(x); - } - } - - /* - * Callback to swap in TLM frame - */ - void tlmCallback(void) { - DBG("tlmCallback"); - if (false == advLock) { - // OK to broadcast - advLock = true; - DBG("advLock = tlm") - frameIndex = tlm; - swapOutFrames(frameIndex); - ble.startAdvertising(); - } else { - // Someone else is broadcasting, toss it into the overflow buffer to retransmit when free - INFO("TLM(%d) cannot complete, %d is currently broadcasting", tlm, frameIndex); - FrameTypes x = tlm; - overflow.push(x); - } - } - - void stopAdvCallback(void) { - if (overflow.empty()) { - // if nothing left to transmit, stop - ble.stopAdvertising(); - advLock = false; // unlock lock - } else { - // transmit other packets at current time index - FrameTypes x = NONE; - overflow.pop(x); - INFO("Re-Transmitting %d", x); - swapOutFrames(x); - } - } - - /* - * Callback from onRadioNotification(), used to update the PDUCounter and process next state. - */ -#define EDDYSTONE_SWAPFRAME_DELAYMS 1 - void radioNotificationCallback(bool radioActive) { - // Update PDUCount - TlmPduCount++; - // True just before an frame is sent, false just after a frame is sent - if (radioActive) { - // Do Nothing - } else { - // Packet has been sent, disable advertising - stopAdv.attach_us(this, &EddystoneService::stopAdvCallback, 1); - } - } - - /* - * This function explicityly sets the parameters used by the Eddystone beacon. - * this function should be used in leu of the config service. - * - * @param bleIn ble object used to broadcast eddystone information - * @param beaconPeriodus is how often ble broadcasts are mde, in mili seconds - * @param txPowerLevel sets the broadcasting power level. - * - */ - EddystoneService(BLEDevice &bleIn, - uint16_t beaconPeriodus = 100, - uint8_t txPowerIn = 0) : - ble(bleIn), - advPeriodus(beaconPeriodus), - txPower(txPowerIn), - advLock(false), - frameIndex(NONE) { - } - - /* - * @breif this function starts eddystone advertising based on configured frames. - */ - void start(void) { - // Initialize Frame transition, start with URL to pass eddystone validator app on first try - if (urlIsSet) { - frameIndex = url; - urlTicker.attach(this, &EddystoneService::urlCallback, (float) advPeriodus / 1000.0f); - DBG("attached urlCallback every %d seconds", urlAdvPeriod); - } - if (uidIsSet) { - frameIndex = uid; - uidTicker.attach(this, &EddystoneService::uidCallback, uidAdvPeriod); - DBG("attached uidCallback every %d seconds", uidAdvPeriod); - } - if (tlmIsSet) { - frameIndex = tlm; - // Make double sure the PDUCount and TimeSinceBoot fields are set to zero at reset - updateTlmPduCount(0); - updateTlmTimeSinceBoot(0); - lastBootTimerRead = 0; - timeSinceBootTimer.start(); - tlmTicker.attach(this, &EddystoneService::tlmCallback, TlmAdvPeriod); - DBG("attached tlmCallback every %d seconds", TlmAdvPeriod); - } - if (NONE == frameIndex) { - error("No Frames were Initialized! Please initialize a frame before starting an eddystone beacon."); - } - //uidRFU = 0; - - ble.setTxPower(txPower); - ble.gap().onRadioNotification(this, &EddystoneService::radioNotificationCallback); - } - -private: - - // Eddystone Variables - BLEDevice &ble; - uint16_t advPeriodus; - uint8_t txPower; - Timer timeSinceBootTimer; - volatile uint32_t lastBootTimerRead; - volatile bool advLock; - volatile FrameTypes frameIndex; - Timeout stopAdv; - - - // URI Frame Variables - uint8_t defaultUriDataLength; - UriData_t defaultUriData; - int8_t defaultUrlPower; - bool urlIsSet; // flag that enables / disable URI Frames - float urlAdvPeriod; // how long the url frame will be advertised for - Ticker urlTicker; - - // UID Frame Variables - UIDNamespaceID_t defaultUidNamespaceID; - UIDInstanceID_t defaultUidInstanceID; - int8_t defaultUidPower; - uint16_t uidRFU; - bool uidIsSet; // flag that enables / disable UID Frames - float uidAdvPeriod; // how long the uid frame will be advertised for - Ticker uidTicker; - - // TLM Frame Variables - uint8_t TlmVersion; - volatile uint16_t TlmBatteryVoltage; - volatile uint16_t TlmBeaconTemp; - volatile uint32_t TlmPduCount; - volatile uint32_t TlmTimeSinceBoot; - bool tlmIsSet; // flag that enables / disables TLM frames - float TlmAdvPeriod; // number of minutes between adv frames - Ticker tlmTicker; - -public: - /* - * Encode a human-readable URI into the binary format defined by URIBeacon spec (https://github.com/google/uribeacon/tree/master/specification). - */ - static void encodeURL(const char *uriDataIn, UriData_t uriDataOut, uint8_t &sizeofURIDataOut) { - DBG("Encode URL = %s", uriDataIn); - const char *prefixes[] = { - "http://www.", - "https://www.", - "http://", - "https://", - }; - const size_t NUM_PREFIXES = sizeof(prefixes) / sizeof(char *); - const char *suffixes[] = { - ".com/", - ".org/", - ".edu/", - ".net/", - ".info/", - ".biz/", - ".gov/", - ".com", - ".org", - ".edu", - ".net", - ".info", - ".biz", - ".gov" - }; - const size_t NUM_SUFFIXES = sizeof(suffixes) / sizeof(char *); - - sizeofURIDataOut = 0; - memset(uriDataOut, 0, sizeof(UriData_t)); - - if ((uriDataIn == NULL) || (strlen(uriDataIn) == 0)) { - return; - } - - /* - * handle prefix - */ - for (unsigned i = 0; i < NUM_PREFIXES; i++) { - size_t prefixLen = strlen(prefixes[i]); - if (strncmp(uriDataIn, prefixes[i], prefixLen) == 0) { - uriDataOut[sizeofURIDataOut++] = i; - uriDataIn += prefixLen; - break; - } - } - - /* - * handle suffixes - */ - while (*uriDataIn && (sizeofURIDataOut < URI_DATA_MAX)) { - /* check for suffix match */ - unsigned i; - for (i = 0; i < NUM_SUFFIXES; i++) { - size_t suffixLen = strlen(suffixes[i]); - if (strncmp(uriDataIn, suffixes[i], suffixLen) == 0) { - uriDataOut[sizeofURIDataOut++] = i; - uriDataIn += suffixLen; - break; /* from the for loop for checking against suffixes */ - } - } - /* This is the default case where we've got an ordinary character which doesn't match a suffix. */ - INFO("Encoding URI: No Suffix Found"); - if (i == NUM_SUFFIXES) { - uriDataOut[sizeofURIDataOut++] = *uriDataIn; - ++uriDataIn; - } - } - } -}; - -#endif // SERVICES_EDDYSTONEBEACON_H_