Remove Eddystone implementation in ble/services

The files EddystoneService.h and EddystoneConfigService.h have been removed
from ble/services since the implementation is not part of the API. Furthermore
a new implementation to replace this one has been developed and is available
in ble-examples repo.
This commit is contained in:
Andres Amaya Garcia 2015-11-20 11:22:42 +00:00
parent 04d10f6547
commit b76d50adf7
2 changed files with 0 additions and 1191 deletions

View file

@ -1,540 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_
#define SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_
#include "mbed.h"
#include "ble/BLE.h"
#include "ble/services/EddystoneService.h"
#define UUID_URI_BEACON(FIRST, SECOND) { \
0xee, 0x0c, FIRST, SECOND, 0x87, 0x86, 0x40, 0xba, \
0xab, 0x96, 0x99, 0xb9, 0x1a, 0xc9, 0x81, 0xd8, \
}
static const uint8_t UUID_URI_BEACON_SERVICE[] = UUID_URI_BEACON(0x20, 0x80);
static const uint8_t UUID_LOCK_STATE_CHAR[] = UUID_URI_BEACON(0x20, 0x81);
static const uint8_t UUID_LOCK_CHAR[] = UUID_URI_BEACON(0x20, 0x82);
static const uint8_t UUID_UNLOCK_CHAR[] = UUID_URI_BEACON(0x20, 0x83);
static const uint8_t UUID_URI_DATA_CHAR[] = UUID_URI_BEACON(0x20, 0x84);
static const uint8_t UUID_FLAGS_CHAR[] = UUID_URI_BEACON(0x20, 0x85);
static const uint8_t UUID_ADV_POWER_LEVELS_CHAR[] = UUID_URI_BEACON(0x20, 0x86);
static const uint8_t UUID_TX_POWER_MODE_CHAR[] = UUID_URI_BEACON(0x20, 0x87);
static const uint8_t UUID_BEACON_PERIOD_CHAR[] = UUID_URI_BEACON(0x20, 0x88);
static const uint8_t UUID_RESET_CHAR[] = UUID_URI_BEACON(0x20, 0x89);
extern const uint8_t BEACON_EDDYSTONE[2];
/**
* @class EddystoneConfigService
* @brief Eddystone Configuration Service. Can be used to set URL, adjust power levels, and set flags.
* See https://github.com/google/eddystone
*
*/
class EddystoneConfigService
{
public:
/**
* @brief Transmission Power Modes for UriBeacon
*/
enum {
TX_POWER_MODE_LOWEST,
TX_POWER_MODE_LOW,
TX_POWER_MODE_MEDIUM,
TX_POWER_MODE_HIGH,
NUM_POWER_MODES
};
static const unsigned ADVERTISING_INTERVAL_MSEC = 1000; // Advertising interval for config service.
static const unsigned SERVICE_DATA_MAX = 31; // Maximum size of service data in ADV packets
typedef uint8_t Lock_t[16]; /* 128 bits */
typedef int8_t PowerLevels_t[NUM_POWER_MODES];
// There are currently 3 subframes defined, URI, UID, and TLM
#define EDDYSTONE_MAX_FRAMETYPE 3
static const unsigned URI_DATA_MAX = 18;
typedef uint8_t UriData_t[URI_DATA_MAX];
// UID Frame Type subfields
static const size_t UID_NAMESPACEID_SIZE = 10;
typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE];
static const size_t UID_INSTANCEID_SIZE = 6;
typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE];
// Eddystone Frame Type ID
static const uint8_t FRAME_TYPE_UID = 0x00;
static const uint8_t FRAME_TYPE_URL = 0x10;
static const uint8_t FRAME_TYPE_TLM = 0x20;
static const uint8_t FRAME_SIZE_TLM = 14; // TLM frame is a constant 14Bytes
static const uint8_t FRAME_SIZE_UID = 20; // includes RFU bytes
struct Params_t {
// Config Data
bool isConfigured; // Flag for configuration being complete,
// True = configured, false = not configured. Reset at instantiation, used for external callbacks.
uint8_t lockedState;
Lock_t lock;
uint8_t flags;
PowerLevels_t advPowerLevels; // Current value of AdvertisedPowerLevels
uint8_t txPowerMode; // Firmware power levels used with setTxPower()
uint16_t beaconPeriod;
// TLM Frame Data
uint8_t tlmVersion; // version of TLM packet
bool tlmEnabled;
float tlmBeaconPeriod; // how often to broadcat TLM frame, in seconds.
// URI Frame Data
uint8_t uriDataLength;
UriData_t uriData;
bool uriEnabled;
float uriBeaconPeriod; // how often to broadcast URIFrame, in seconds.
// UID Frame Data
UIDNamespaceID_t uidNamespaceID; // UUID type, Namespace ID, 10B
UIDInstanceID_t uidInstanceID; // UUID type, Instance ID, 6B
bool uidEnabled;
float uidBeaconPeriod; // how often to broadcast UID Frame, in seconds.
};
/**
* @param[ref] ble
* BLEDevice object for the underlying controller.
* @param[in/out] paramsIn
* Reference to application-visible beacon state, loaded
* from persistent storage at startup.
* @param[in] defaultAdvPowerLevelsIn
* Default power-levels array; applies only if the resetToDefaultsFlag is true.
*/
EddystoneConfigService(BLEDevice &bleIn,
Params_t &paramsIn,
PowerLevels_t &defaultAdvPowerLevelsIn,
PowerLevels_t &radioPowerLevelsIn) :
ble(bleIn),
params(paramsIn), // Initialize URL Data
defaultAdvPowerLevels(defaultAdvPowerLevelsIn),
radioPowerLevels(radioPowerLevelsIn),
initSucceeded(false),
resetFlag(),
defaultUidNamespaceID(), // Initialize UID Data
defaultUidInstanceID(),
defaultUidPower(defaultAdvPowerLevelsIn[params.txPowerMode]),
uidIsSet(false),
defaultUriDataLength(),
defaultUriData(),
defaultUrlPower(defaultAdvPowerLevelsIn[params.txPowerMode]),
urlIsSet(false),
tlmIsSet(false),
lockedStateChar(UUID_LOCK_STATE_CHAR, &params.lockedState),
lockChar(UUID_LOCK_CHAR, &params.lock),
uriDataChar(UUID_URI_DATA_CHAR, params.uriData, 0, URI_DATA_MAX,
GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE),
unlockChar(UUID_UNLOCK_CHAR, &params.lock),
flagsChar(UUID_FLAGS_CHAR, &params.flags),
advPowerLevelsChar(UUID_ADV_POWER_LEVELS_CHAR, &params.advPowerLevels),
txPowerModeChar(UUID_TX_POWER_MODE_CHAR, &params.txPowerMode),
beaconPeriodChar(UUID_BEACON_PERIOD_CHAR, &params.beaconPeriod),
resetChar(UUID_RESET_CHAR, &resetFlag) {
// set eddystone as not configured yet. Used to exit config before timeout if GATT services are written to.
params.isConfigured = false;
lockChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::lockAuthorizationCallback);
unlockChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::unlockAuthorizationCallback);
uriDataChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::uriDataWriteAuthorizationCallback);
flagsChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback<uint8_t>);
advPowerLevelsChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback<PowerLevels_t>);
txPowerModeChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::powerModeAuthorizationCallback);
beaconPeriodChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback<uint16_t>);
resetChar.setWriteAuthorizationCallback(this, &EddystoneConfigService::basicAuthorizationCallback<uint8_t>);
static GattCharacteristic *charTable[] = {
&lockedStateChar, &lockChar, &unlockChar, &uriDataChar,
&flagsChar, &advPowerLevelsChar, &txPowerModeChar, &beaconPeriodChar, &resetChar
};
GattService configService(UUID_URI_BEACON_SERVICE, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
ble.addService(configService);
ble.onDataWritten(this, &EddystoneConfigService::onDataWrittenCallback);
}
/**
* @brief Start EddystoneConfig advertising. This function should be called
* after the EddystoneConfig constructor and after all the frames have been added.
*
* @paramsP[in] resetToDefaultsFlag
* Applies to the state of the 'paramsIn' parameter.
* If true, it indicates that paramsIn is potentially
* un-initialized, and default values should be used
* instead. Otherwise, paramsIn overrides the defaults.
*/
void start(bool resetToDefaultsFlag){
INFO("reset to defaults flag = %d", resetToDefaultsFlag);
if (!resetToDefaultsFlag && (params.uriDataLength > URI_DATA_MAX)) {
INFO("Reset to Defaults triggered");
resetToDefaultsFlag = true;
}
if (resetToDefaultsFlag) {
resetToDefaults();
} else {
updateCharacteristicValues();
}
setupEddystoneConfigAdvertisements(); /* Setup advertising for the configService. */
initSucceeded = true;
}
/*
* Check if eddystone initialized successfully
*/
bool initSuccessfully(void) const {
return initSucceeded;
}
/*
* @brief Function to update the default values for the TLM frame. Only applied if Reset Defaults is applied.
*
* @param[in] tlmVersionIn Version of the TLM frame being used
* @param[in] advPeriodInMin how long between TLM frames being advertised, this is measured in minutes.
*
*/
void setDefaultTLMFrameData(uint8_t tlmVersionIn = 0, float advPeriodInSec = 60){
DBG("Setting Default TLM Data, version = %d, advPeriodInMind= %f", tlmVersionIn, advPeriodInSec);
defaultTlmVersion = tlmVersionIn;
TlmBatteryVoltage = 0;
TlmBeaconTemp = 0x8000;
TlmPduCount = 0;
TlmTimeSinceBoot = 0;
defaultTlmAdvPeriod = advPeriodInSec;
tlmIsSet = true; // flag to add this to eddystone service when config is done
}
/*
* @brief Function to update the default values for the URI frame. Only applied if Reset Defaults is applied.
*
* @param[in] uriIn url to advertise
* @param[in] advPeriod how long to advertise the url for, measured in number of ADV frames.
*
*/
void setDefaultURIFrameData(const char *uriIn, float advPeriod = 1){
DBG("Setting Default URI Data");
// Set URL Frame
EddystoneService::encodeURL(uriIn, defaultUriData, defaultUriDataLength); // encode URL to URL Formatting
if (defaultUriDataLength > URI_DATA_MAX) {
return;
}
INFO("\t URI input = %s : %d", uriIn, defaultUriDataLength);
INFO("\t default URI = %s : %d ", defaultUriData, defaultUriDataLength );
defaultUriAdvPeriod = advPeriod;
urlIsSet = true; // flag to add this to eddystone service when config is done
}
/*
* @brief Function to update the default values for the UID frame. Only applied if Reset Defaults is applied.
*
* @param[in] namespaceID 10Byte Namespace ID
* @param[in] instanceID 6Byte Instance ID
* @param[in] advPeriod how long to advertise the URL for, measured in the number of adv frames.
*
*/
void setDefaultUIDFrameData(UIDNamespaceID_t *namespaceID, UIDInstanceID_t *instanceID, float advPeriod = 10){
//Set UID frame
DBG("Setting default UID Data");
memcpy(defaultUidNamespaceID, namespaceID, UID_NAMESPACEID_SIZE);
memcpy(defaultUidInstanceID, instanceID, UID_INSTANCEID_SIZE);
defaultUidAdvPeriod = advPeriod;
uidIsSet = true; // flag to add this to eddystone service when config is done
}
/* Start out by advertising the configService for a limited time after
* startup; and switch to the normal non-connectible beacon functionality
* afterwards. */
void setupEddystoneConfigAdvertisements() {
const char DEVICE_NAME[] = "eddystone Config";
ble.clearAdvertisingPayload();
ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
// UUID is in different order in the ADV frame (!)
uint8_t reversedServiceUUID[sizeof(UUID_URI_BEACON_SERVICE)];
for (unsigned int i = 0; i < sizeof(UUID_URI_BEACON_SERVICE); i++) {
reversedServiceUUID[i] = UUID_URI_BEACON_SERVICE[sizeof(UUID_URI_BEACON_SERVICE) - i - 1];
}
ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS, reversedServiceUUID, sizeof(reversedServiceUUID));
ble.accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_TAG);
ble.accumulateScanResponse(GapAdvertisingData::COMPLETE_LOCAL_NAME, reinterpret_cast<const uint8_t *>(&DEVICE_NAME), sizeof(DEVICE_NAME));
ble.accumulateScanResponse(
GapAdvertisingData::TX_POWER_LEVEL,
reinterpret_cast<uint8_t *>(&defaultAdvPowerLevels[EddystoneConfigService::TX_POWER_MODE_LOW]),
sizeof(uint8_t));
ble.setTxPower(radioPowerLevels[params.txPowerMode]);
ble.setDeviceName(reinterpret_cast<const uint8_t *>(&DEVICE_NAME));
ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
ble.setAdvertisingInterval(ADVERTISING_INTERVAL_MSEC);
}
/*
* This function actually impliments the Eddystone Beacon service. It can be called with the help of the wrapper function
* to load saved config params, or it can be called explicitly to reset the eddystone beacon to hardcoded values on each reset.
*
*/
void setupEddystoneAdvertisements() {
DBG("Switching Config -> adv");
// Save params to storage
extern void saveURIBeaconConfigParams(const Params_t *paramsP); /* forward declaration; necessary to avoid a circular dependency. */
saveURIBeaconConfigParams(&params);
INFO("Saved Params to Memory.")
// Setup Eddystone Service
static EddystoneService eddyServ(ble, params.beaconPeriod, radioPowerLevels[params.txPowerMode]);
// Set configured frames (TLM,UID,URI...etc)
if (params.tlmEnabled) {
eddyServ.setTLMFrameData(params.tlmVersion, params.tlmBeaconPeriod);
}
if (params.uriEnabled) {
eddyServ.setURLFrameEncodedData(params.advPowerLevels[params.txPowerMode], (const char *) params.uriData, params.uriDataLength, params.uriBeaconPeriod);
}
if (params.uidEnabled) {
eddyServ.setUIDFrameData(params.advPowerLevels[params.txPowerMode],
(uint8_t *)params.uidNamespaceID,
(uint8_t *)params.uidInstanceID,
params.uidBeaconPeriod);
}
// Start Advertising the eddystone service.
eddyServ.start();
}
private:
/*
* This callback is invoked when a GATT client attempts to modify any of the
* characteristics of this service. Attempts to do so are also applied to
* the internal state of this service object.
*/
void onDataWrittenCallback(const GattWriteCallbackParams *writeParams) {
uint16_t handle = writeParams->handle;
if (handle == lockChar.getValueHandle()) {
// Validated earlier
memcpy(params.lock, writeParams->data, sizeof(Lock_t));
// Set the state to be locked by the lock code (note: zeros are a valid lock)
params.lockedState = true;
INFO("Device Locked");
} else if (handle == unlockChar.getValueHandle()) {
// Validated earlier
params.lockedState = false;
INFO("Device Unlocked");
} else if (handle == uriDataChar.getValueHandle()) {
params.uriDataLength = writeParams->len;
memset(params.uriData, 0x00, URI_DATA_MAX); // clear URI string
memcpy(params.uriData, writeParams->data, writeParams->len); // set URI string
params.uriEnabled = true;
INFO("URI = %s, URILen = %d", writeParams->data, writeParams->len);
} else if (handle == flagsChar.getValueHandle()) {
params.flags = *(writeParams->data);
INFO("flagsChar = 0x%x", params.flags);
} else if (handle == advPowerLevelsChar.getValueHandle()) {
memcpy(params.advPowerLevels, writeParams->data, sizeof(PowerLevels_t));
INFO("PowerLevelsChar = %4x", params.advPowerLevels);
} else if (handle == txPowerModeChar.getValueHandle()) {
params.txPowerMode = *(writeParams->data);
INFO("TxPowerModeChar = %d", params.txPowerMode);
} else if (handle == beaconPeriodChar.getValueHandle()) {
params.beaconPeriod = *((uint16_t *)(writeParams->data));
INFO("BeaconPeriod = %d", params.beaconPeriod);
/* Re-map beaconPeriod to within permissible bounds if necessary. */
if (params.beaconPeriod != 0) {
bool paramsUpdated = false;
if (params.beaconPeriod < ble.getMinAdvertisingInterval()) {
params.beaconPeriod = ble.getMinAdvertisingInterval();
paramsUpdated = true;
} else if (params.beaconPeriod > ble.getMaxAdvertisingInterval()) {
params.beaconPeriod = ble.getMaxAdvertisingInterval();
paramsUpdated = true;
}
if (paramsUpdated) {
ble.updateCharacteristicValue(beaconPeriodChar.getValueHandle(), reinterpret_cast<uint8_t *>(&params.beaconPeriod), sizeof(uint16_t));
}
}
} else if (handle == resetChar.getValueHandle()) {
INFO("Reset triggered from Config Service, resetting to defaults");
resetToDefaults();
}
updateCharacteristicValues();
params.isConfigured = true; // some configuration data has been passed, on disconnect switch to advertising mode.
}
/*
* Reset the default values.
*/
void resetToDefaults(void) {
INFO("Resetting to defaults");
// General
params.lockedState = false;
memset(params.lock, 0, sizeof(Lock_t));
params.flags = 0x10;
memcpy(params.advPowerLevels, defaultAdvPowerLevels, sizeof(PowerLevels_t));
params.txPowerMode = TX_POWER_MODE_LOW;
params.beaconPeriod = (uint16_t) defaultUriAdvPeriod * 1000;
// TLM Frame
params.tlmVersion = defaultTlmVersion;
params.tlmBeaconPeriod = defaultTlmAdvPeriod;
params.tlmEnabled = tlmIsSet;
// URL Frame
memcpy(params.uriData, defaultUriData, URI_DATA_MAX);
params.uriDataLength = defaultUriDataLength;
params.uriBeaconPeriod = defaultUriAdvPeriod;
params.uriEnabled = urlIsSet;
// UID Frame
memcpy(params.uidNamespaceID, defaultUidNamespaceID, UID_NAMESPACEID_SIZE);
memcpy(params.uidInstanceID, defaultUidInstanceID, UID_INSTANCEID_SIZE);
params.uidBeaconPeriod = defaultUidAdvPeriod;
params.uidEnabled = uidIsSet;
updateCharacteristicValues();
}
/*
* Internal helper function used to update the GATT database following any
* change to the internal state of the service object.
*/
void updateCharacteristicValues(void) {
ble.updateCharacteristicValue(lockedStateChar.getValueHandle(), &params.lockedState, 1);
ble.updateCharacteristicValue(uriDataChar.getValueHandle(), params.uriData, params.uriDataLength);
ble.updateCharacteristicValue(flagsChar.getValueHandle(), &params.flags, 1);
ble.updateCharacteristicValue(beaconPeriodChar.getValueHandle(),
reinterpret_cast<uint8_t *>(&params.beaconPeriod), sizeof(uint16_t));
ble.updateCharacteristicValue(txPowerModeChar.getValueHandle(), &params.txPowerMode, 1);
ble.updateCharacteristicValue(advPowerLevelsChar.getValueHandle(),
reinterpret_cast<uint8_t *>(params.advPowerLevels), sizeof(PowerLevels_t));
}
private:
void lockAuthorizationCallback(GattWriteAuthCallbackParams *authParams) {
if (params.lockedState) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION;
} else if (authParams->len != sizeof(Lock_t)) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH;
} else if (authParams->offset != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET;
} else {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
}
}
void unlockAuthorizationCallback(GattWriteAuthCallbackParams *authParams) {
if ((!params.lockedState) && (authParams->len == sizeof(Lock_t))) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
} else if (authParams->len != sizeof(Lock_t)) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH;
} else if (authParams->offset != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET;
} else if (memcmp(authParams->data, params.lock, sizeof(Lock_t)) != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION;
} else {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
}
}
void uriDataWriteAuthorizationCallback(GattWriteAuthCallbackParams *authParams) {
if (params.lockedState) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION;
} else if (authParams->offset != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET;
} else {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
}
}
void powerModeAuthorizationCallback(GattWriteAuthCallbackParams *authParams) {
if (params.lockedState) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION;
} else if (authParams->len != sizeof(uint8_t)) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH;
} else if (authParams->offset != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET;
} else if (*((uint8_t *)authParams->data) >= NUM_POWER_MODES) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED;
} else {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
}
}
template <typename T>
void basicAuthorizationCallback(GattWriteAuthCallbackParams *authParams) {
if (params.lockedState) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION;
} else if (authParams->len != sizeof(T)) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH;
} else if (authParams->offset != 0) {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET;
} else {
authParams->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS;
}
}
BLEDevice &ble;
Params_t &params;
Ticker timeSinceBootTick;
Timeout switchFrame;
// Default value that is restored on reset
PowerLevels_t &defaultAdvPowerLevels; // this goes into the advertising frames (radio power measured at 1m from device)
PowerLevels_t &radioPowerLevels; // this configures the power levels of the radio
uint8_t lockedState;
bool initSucceeded;
uint8_t resetFlag;
bool switchFlag;
//UID Default value that is restored on reset
UIDNamespaceID_t defaultUidNamespaceID;
UIDInstanceID_t defaultUidInstanceID;
float defaultUidAdvPeriod;
int8_t defaultUidPower;
uint16_t uidRFU;
bool uidIsSet;
//URI Default value that is restored on reset
uint8_t defaultUriDataLength;
UriData_t defaultUriData;
int8_t defaultUrlPower;
float defaultUriAdvPeriod;
bool urlIsSet;
//TLM Default value that is restored on reset
uint8_t defaultTlmVersion;
float defaultTlmAdvPeriod;
volatile uint16_t TlmBatteryVoltage;
volatile uint16_t TlmBeaconTemp;
volatile uint32_t TlmPduCount;
volatile uint32_t TlmTimeSinceBoot;
bool tlmIsSet;
ReadOnlyGattCharacteristic<uint8_t> lockedStateChar;
WriteOnlyGattCharacteristic<Lock_t> lockChar;
GattCharacteristic uriDataChar;
WriteOnlyGattCharacteristic<Lock_t> unlockChar;
ReadWriteGattCharacteristic<uint8_t> flagsChar;
ReadWriteGattCharacteristic<PowerLevels_t> advPowerLevelsChar;
ReadWriteGattCharacteristic<uint8_t> txPowerModeChar;
ReadWriteGattCharacteristic<uint16_t> beaconPeriodChar;
WriteOnlyGattCharacteristic<uint8_t> resetChar;
};
#endif // SERVICES_EDDYSTONE_BEACON_CONFIG_SERVICE_H_

View file

@ -1,651 +0,0 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2015 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SERVICES_EDDYSTONEBEACON_H_
#define SERVICES_EDDYSTONEBEACON_H_
#include "ble/BLE.h"
#include "mbed.h"
#include "CircularBuffer.h"
static const uint8_t BEACON_EDDYSTONE[] = {0xAA, 0xFE};
//Debug is disabled by default
#if 0
#define DBG(MSG, ...) printf("[EddyStone: DBG]" MSG " \t[%s,%d]\r\n", \
## __VA_ARGS__, \
__FILE__, \
__LINE__);
#define WARN(MSG, ...) printf("[EddyStone: WARN]" MSG " \t[%s,%d]\r\n", \
## __VA_ARGS__, \
__FILE__, \
__LINE__);
#define ERR(MSG, ...) printf("[EddyStone: ERR]" MSG " \t[%s,%d]\r\n", \
## __VA_ARGS__, \
__FILE__, \
__LINE__);
#else // if 0
#define DBG(x, ...) //wait_us(10);
#define WARN(x, ...) //wait_us(10);
#define ERR(x, ...)
#endif // if 0
#if 0
#define INFO(x, ...) printf("[EddyStone: INFO]"x " \t[%s,%d]\r\n", \
## __VA_ARGS__, \
__FILE__, \
__LINE__);
#else // if 0
#define INFO(x, ...)
#endif // if 0
/**
* @class Eddystone
* @brief Eddystone Configuration Service. Can be used to set URL, adjust power levels, and set flags.
* See https://github.com/google/eddystone
*
*/
class EddystoneService
{
public:
enum FrameTypes {
NONE,
url,
uid,
tlm
};
static const int SERVICE_DATA_MAX = 31; // Maximum size of service data in ADV packets
// There are currently 3 subframes defined, URI, UID, and TLM
#define EDDYSTONE_MAX_FRAMETYPE 3
void (*frames[EDDYSTONE_MAX_FRAMETYPE])(uint8_t *, uint32_t);
static const int URI_DATA_MAX = 18;
typedef uint8_t UriData_t[URI_DATA_MAX];
CircularBuffer<FrameTypes, EDDYSTONE_MAX_FRAMETYPE> overflow;
// UID Frame Type subfields
static const int UID_NAMESPACEID_SIZE = 10;
typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE];
static const int UID_INSTANCEID_SIZE = 6;
typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE];
// Eddystone Frame Type ID
static const uint8_t FRAME_TYPE_UID = 0x00;
static const uint8_t FRAME_TYPE_URL = 0x10;
static const uint8_t FRAME_TYPE_TLM = 0x20;
static const uint8_t FRAME_SIZE_TLM = 14; // TLM frame is a constant 14Bytes
static const uint8_t FRAME_SIZE_UID = 20; // includes RFU bytes
/**
* Set Eddystone UID Frame information.
*
* @param[in] power TX Power in dB measured at 0 meters from the device. Range of -100 to +20 dB.
* @param[in] namespaceID 10B namespace ID
* @param[in] instanceID 6B instance ID
* @param[in] RFU 2B of RFU, initialized to 0x0000 and not broadcast, included for future reference.
*/
void setUIDFrameData(int8_t power,
UIDNamespaceID_t namespaceID,
UIDInstanceID_t instanceID,
float uidAdvPeriodIn,
uint16_t RFU = 0x0000) {
if (0.0f == uidAdvPeriodIn) {
uidIsSet = false;
return;
}
if (power > 20) {
power = 20;
}
if (power < -100) {
power = -100;
}
defaultUidPower = power;
memcpy(defaultUidNamespaceID, namespaceID, UID_NAMESPACEID_SIZE);
memcpy(defaultUidInstanceID, instanceID, UID_INSTANCEID_SIZE);
uidRFU = (uint16_t)RFU; // this is probably bad form, but it doesn't really matter yet.
uidAdvPeriod = uidAdvPeriodIn;
uidIsSet = true; // set toggle to advertise UID frames
}
/*
* Construct UID frame from private variables
* @param[in/out] Data pointer to array to store constructed frame in
* @param[in] maxSize number of bytes left in array, effectively how much empty space is available to write to
* @return number of bytes used. negative number indicates error message.
*/
unsigned constructUIDFrame(uint8_t *Data, uint8_t maxSize) {
unsigned index = 0;
Data[index++] = FRAME_TYPE_UID; // 1B Type
if (defaultUidPower > 20) {
defaultUidPower = 20; // enforce range of vaild values.
}
if (defaultUidPower < -100) {
defaultUidPower = -100;
}
Data[index++] = defaultUidPower; // 1B Power @ 0meter
DBG("UID NamespaceID = '0x");
for (size_t x = 0; x < UID_NAMESPACEID_SIZE; x++) { // 10B Namespace ID
Data[index++] = defaultUidNamespaceID[x];
DBG("%x,", defaultUidNamespaceID[x]);
}
DBG("'\r\n");
DBG("UID InstanceID = '0x");
for (size_t x = 0; x< UID_INSTANCEID_SIZE; x++) { // 6B Instance ID
Data[index++] = defaultUidInstanceID[x];
DBG("%x,", defaultUidInstanceID[x]);
}
DBG("'\r\n");
if (0 != uidRFU) { // 2B RFU, include if non-zero, otherwise ignore
Data[index++] = (uint8_t)(uidRFU >> 0);
Data[index++] = (uint8_t)(uidRFU >> 8);
}
DBG("construcUIDFrame %d, %d", maxSize, index);
return index;
}
/**
* Set Eddystone URL Frame information.
* @param[in] power TX Power in dB measured at 0 meters from the device.
* @param[in] url URL to encode
* @param[in] urlAdvPeriodIn How long to advertise the URL frame (measured in # of adv periods)
* @return false on success, true on failure.
*/
bool setURLFrameData(int8_t power, const char *urlIn, float urlAdvPeriodIn) {
if (0.0f == urlAdvPeriodIn) {
urlIsSet = false;
return false;
}
encodeURL(urlIn, defaultUriData, defaultUriDataLength); // encode URL to URL Formatting
if (defaultUriDataLength > URI_DATA_MAX) {
return true; // error, URL is too big
}
defaultUrlPower = power;
urlAdvPeriod = urlAdvPeriodIn;
urlIsSet = true;
return false;
}
/**
* Set Eddystone URL Frame information.
* @param[in] power TX Power in dB measured at 0 meters from the device.
* @param[in] encodedUrlIn Encoded URL
* @param[in] encodedUrlInLength Length of the encoded URL
* @param[in] urlAdvPeriodIn How long to advertise the URL frame (measured in # of adv periods)
* @return false on success, true on failure.
*/
bool setURLFrameEncodedData(int8_t power, const char *encodedUrlIn, uint8_t encodedUrlInLength, float urlAdvPeriodIn) {
if (0.0f == urlAdvPeriodIn) {
urlIsSet = false;
return false;
}
memcpy(defaultUriData, encodedUrlIn, encodedUrlInLength);
if (defaultUriDataLength > URI_DATA_MAX) {
return true; // error, URL is too big
}
defaultUrlPower = power;
defaultUriDataLength = encodedUrlInLength;
urlAdvPeriod = urlAdvPeriodIn;
urlIsSet = true;
return false;
}
/*
* Construct URL frame from private variables
* @param[in/out] Data pointer to array to store constructed frame in
* @param[in] maxSize number of bytes left in array, effectively how much emtpy space is available to write to
* @return number of bytes used. negative number indicates error message.
*/
int constructURLFrame(uint8_t *Data, uint8_t maxSize) {
int index = 0;
Data[index++] = FRAME_TYPE_URL; // 1B Type
Data[index++] = defaultUrlPower; // 1B TX Power
for (int x = 0; x < defaultUriDataLength; x++) { // 18B of URL Prefix + encoded URL
Data[index++] = defaultUriData[x];
}
DBG("constructURLFrame: %d, %d", maxSize, index);
return index;
}
/*
* Set Eddystone TLM Frame information.
* @param[in] Version of the TLM beacon data format
* @param[in] advPeriod how often to advertise the TLM frame for (in minutes)
* @param batteryVoltage in milivolts
* @param beaconTemp in 8.8 floating point notation
*
*/
void setTLMFrameData(uint8_t version = 0,
float advPeriod = 60.0f,
uint16_t batteryVoltage = 0,
uint16_t beaconTemp = 0x8000,
uint32_t pduCount = 0,
uint32_t timeSinceBoot = 0) {
if (0.0f == advPeriod) {
tlmIsSet = false;
return;
}
TlmVersion = version;
TlmBatteryVoltage = batteryVoltage;
TlmBeaconTemp = beaconTemp;
TlmPduCount = pduCount; // reset
TlmTimeSinceBoot = timeSinceBoot; // reset
TlmAdvPeriod = advPeriod;
tlmIsSet = true; // TLM Data has been enabled
}
/*
* Construct TLM frame from private variables
* @param[in/out] Data pointer to array to store constructed frame in
* @param[in] maxSize number of bytes left in array, effectively how much emtpy space is available to write to
* @return number of bytes used. negative number indicates error message.
*/
int constructTLMFrame(uint8_t *Data, uint8_t maxSize) {
uint32_t now = timeSinceBootTimer.read_ms();
TlmTimeSinceBoot += (now - lastBootTimerRead) / 100;
lastBootTimerRead = now;
int index = 0;
Data[index++] = FRAME_TYPE_TLM; // Eddystone frame type = Telemetry
Data[index++] = TlmVersion; // TLM Version Number
Data[index++] = (uint8_t)(TlmBatteryVoltage >> 8); // Battery Voltage[0]
Data[index++] = (uint8_t)(TlmBatteryVoltage >> 0); // Battery Voltage[1]
Data[index++] = (uint8_t)(TlmBeaconTemp >> 8); // Beacon Temp[0]
Data[index++] = (uint8_t)(TlmBeaconTemp >> 0); // Beacon Temp[1]
Data[index++] = (uint8_t)(TlmPduCount >> 24); // PDU Count [0]
Data[index++] = (uint8_t)(TlmPduCount >> 16); // PDU Count [1]
Data[index++] = (uint8_t)(TlmPduCount >> 8); // PDU Count [2]
Data[index++] = (uint8_t)(TlmPduCount >> 0); // PDU Count [3]
Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 24); // Time Since Boot [0]
Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 16); // Time Since Boot [1]
Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 8); // Time Since Boot [2]
Data[index++] = (uint8_t)(TlmTimeSinceBoot >> 0); // Time Since Boot [3]
DBG("constructURLFrame: %d, %d", maxSize, index);
return index;
}
/*
* Update the TLM frame battery voltage value
* @param[in] voltagemv Voltage to update the TLM field battery voltage with (in mV)
* @return nothing
*/
void updateTlmBatteryVoltage(uint16_t voltagemv) {
TlmBatteryVoltage = voltagemv;
}
/*
* Update the TLM frame beacon temperature
* @param[in] temp Temperature of beacon (in 8.8fpn)
* @return nothing
*/
void updateTlmBeaconTemp(uint16_t temp) {
TlmBeaconTemp = temp;
}
/*
* Update the TLM frame PDU Count field
* @param[in] pduCount Number of Advertisiting frames sent since powerup
* @return nothing
*/
void updateTlmPduCount(uint32_t pduCount) {
TlmPduCount = pduCount;
}
/*
* Update the TLM frame Time since boot in 0.1s incriments
* @param[in] timeSinceBoot Time since boot in 0.1s incriments
* @return nothing
*/
void updateTlmTimeSinceBoot(uint32_t timeSinceBoot) {
TlmTimeSinceBoot = timeSinceBoot;
}
/*
* Update advertising data
* @return true on success, false on failure
*/
bool updateAdvPacket(uint8_t serviceData[], unsigned serviceDataLen) {
// Fields from the Service
DBG("Updating AdvFrame: %d", serviceDataLen);
ble.clearAdvertisingPayload();
ble.setAdvertisingType(GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED);
ble.setAdvertisingInterval(100);
ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, BEACON_EDDYSTONE, sizeof(BEACON_EDDYSTONE));
ble.accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, serviceData, serviceDataLen);
return true;
}
/*
* State machine for switching out frames.
* This function is called by the radioNotificationCallback when a frame needs to get swapped out.
* This function exists because of time constraints in the radioNotificationCallback, so it is effectively
* broken up into two functions.
*/
void swapOutFrames(FrameTypes frameType) {
uint8_t serviceData[SERVICE_DATA_MAX];
unsigned serviceDataLen = 0;
//hard code in the eddystone UUID
serviceData[serviceDataLen++] = BEACON_EDDYSTONE[0];
serviceData[serviceDataLen++] = BEACON_EDDYSTONE[1];
// if certain frames are not enabled, then skip them. Worst case TLM is always enabled
switch (frameType) {
case tlm:
// TLM frame
if (tlmIsSet) {
DBG("Swapping in TLM Frame: version=%x, Batt=%d, Temp = %d, PDUCnt = %d, TimeSinceBoot=%d",
TlmVersion,
TlmBatteryVoltage,
TlmBeaconTemp,
TlmPduCount,
TlmTimeSinceBoot);
serviceDataLen += constructTLMFrame(serviceData + serviceDataLen, 20);
DBG("\t Swapping in TLM Frame: len=%d", serviceDataLen);
updateAdvPacket(serviceData, serviceDataLen);
}
break;
case url:
// URL Frame
if (urlIsSet) {
DBG("Swapping in URL Frame: Power: %d", defaultUrlPower);
serviceDataLen += constructURLFrame(serviceData + serviceDataLen, 20);
DBG("\t Swapping in URL Frame: len=%d ", serviceDataLen);
updateAdvPacket(serviceData, serviceDataLen);
//switchFlag = false;
}
break;
case uid:
// UID Frame
if (uidIsSet) {
DBG("Swapping in UID Frame: Power: %d", defaultUidPower);
serviceDataLen += constructUIDFrame(serviceData + serviceDataLen, 20);
DBG("\t Swapping in UID Frame: len=%d", serviceDataLen);
updateAdvPacket(serviceData, serviceDataLen);
//switchFlag = false;
}
break;
default:
ERR("You have not initialized a Frame yet, please initialize one before starting a beacon");
ERR("uidIsSet = %d, urlIsSet = %d, tlmIsSet = %d", uidIsSet, urlIsSet, tlmIsSet);
}
}
/*
* Callback to swap in URL frame
*/
void urlCallback(void) {
DBG("urlCallback");
if (false == advLock) {
advLock = true;
DBG("advLock = url")
frameIndex = url;
swapOutFrames(frameIndex);
ble.startAdvertising();
} else {
// Someone else is broadcasting, toss it into the overflow buffer to retransmit when free
INFO("URI(%d) cannot complete, %d is currently broadcasting", url, frameIndex);
FrameTypes x = url;
overflow.push(x);
}
}
/*
* Callback to swap in UID frame
*/
void uidCallback(void) {
DBG("uidCallback");
if (false == advLock) {
advLock = true;
DBG("advLock = uid")
frameIndex = uid;
swapOutFrames(frameIndex);
ble.startAdvertising();
} else {
// Someone else is broadcasting, toss it into the overflow buffer to retransmit when free
INFO("UID(%d) cannot complete, %d is currently broadcasting", uid, frameIndex);
FrameTypes x = uid; // have to do this to satisfy cont vs volatile keywords... sigh...
overflow.push(x);
}
}
/*
* Callback to swap in TLM frame
*/
void tlmCallback(void) {
DBG("tlmCallback");
if (false == advLock) {
// OK to broadcast
advLock = true;
DBG("advLock = tlm")
frameIndex = tlm;
swapOutFrames(frameIndex);
ble.startAdvertising();
} else {
// Someone else is broadcasting, toss it into the overflow buffer to retransmit when free
INFO("TLM(%d) cannot complete, %d is currently broadcasting", tlm, frameIndex);
FrameTypes x = tlm;
overflow.push(x);
}
}
void stopAdvCallback(void) {
if (overflow.empty()) {
// if nothing left to transmit, stop
ble.stopAdvertising();
advLock = false; // unlock lock
} else {
// transmit other packets at current time index
FrameTypes x = NONE;
overflow.pop(x);
INFO("Re-Transmitting %d", x);
swapOutFrames(x);
}
}
/*
* Callback from onRadioNotification(), used to update the PDUCounter and process next state.
*/
#define EDDYSTONE_SWAPFRAME_DELAYMS 1
void radioNotificationCallback(bool radioActive) {
// Update PDUCount
TlmPduCount++;
// True just before an frame is sent, false just after a frame is sent
if (radioActive) {
// Do Nothing
} else {
// Packet has been sent, disable advertising
stopAdv.attach_us(this, &EddystoneService::stopAdvCallback, 1);
}
}
/*
* This function explicityly sets the parameters used by the Eddystone beacon.
* this function should be used in leu of the config service.
*
* @param bleIn ble object used to broadcast eddystone information
* @param beaconPeriodus is how often ble broadcasts are mde, in mili seconds
* @param txPowerLevel sets the broadcasting power level.
*
*/
EddystoneService(BLEDevice &bleIn,
uint16_t beaconPeriodus = 100,
uint8_t txPowerIn = 0) :
ble(bleIn),
advPeriodus(beaconPeriodus),
txPower(txPowerIn),
advLock(false),
frameIndex(NONE) {
}
/*
* @breif this function starts eddystone advertising based on configured frames.
*/
void start(void) {
// Initialize Frame transition, start with URL to pass eddystone validator app on first try
if (urlIsSet) {
frameIndex = url;
urlTicker.attach(this, &EddystoneService::urlCallback, (float) advPeriodus / 1000.0f);
DBG("attached urlCallback every %d seconds", urlAdvPeriod);
}
if (uidIsSet) {
frameIndex = uid;
uidTicker.attach(this, &EddystoneService::uidCallback, uidAdvPeriod);
DBG("attached uidCallback every %d seconds", uidAdvPeriod);
}
if (tlmIsSet) {
frameIndex = tlm;
// Make double sure the PDUCount and TimeSinceBoot fields are set to zero at reset
updateTlmPduCount(0);
updateTlmTimeSinceBoot(0);
lastBootTimerRead = 0;
timeSinceBootTimer.start();
tlmTicker.attach(this, &EddystoneService::tlmCallback, TlmAdvPeriod);
DBG("attached tlmCallback every %d seconds", TlmAdvPeriod);
}
if (NONE == frameIndex) {
error("No Frames were Initialized! Please initialize a frame before starting an eddystone beacon.");
}
//uidRFU = 0;
ble.setTxPower(txPower);
ble.gap().onRadioNotification(this, &EddystoneService::radioNotificationCallback);
}
private:
// Eddystone Variables
BLEDevice &ble;
uint16_t advPeriodus;
uint8_t txPower;
Timer timeSinceBootTimer;
volatile uint32_t lastBootTimerRead;
volatile bool advLock;
volatile FrameTypes frameIndex;
Timeout stopAdv;
// URI Frame Variables
uint8_t defaultUriDataLength;
UriData_t defaultUriData;
int8_t defaultUrlPower;
bool urlIsSet; // flag that enables / disable URI Frames
float urlAdvPeriod; // how long the url frame will be advertised for
Ticker urlTicker;
// UID Frame Variables
UIDNamespaceID_t defaultUidNamespaceID;
UIDInstanceID_t defaultUidInstanceID;
int8_t defaultUidPower;
uint16_t uidRFU;
bool uidIsSet; // flag that enables / disable UID Frames
float uidAdvPeriod; // how long the uid frame will be advertised for
Ticker uidTicker;
// TLM Frame Variables
uint8_t TlmVersion;
volatile uint16_t TlmBatteryVoltage;
volatile uint16_t TlmBeaconTemp;
volatile uint32_t TlmPduCount;
volatile uint32_t TlmTimeSinceBoot;
bool tlmIsSet; // flag that enables / disables TLM frames
float TlmAdvPeriod; // number of minutes between adv frames
Ticker tlmTicker;
public:
/*
* Encode a human-readable URI into the binary format defined by URIBeacon spec (https://github.com/google/uribeacon/tree/master/specification).
*/
static void encodeURL(const char *uriDataIn, UriData_t uriDataOut, uint8_t &sizeofURIDataOut) {
DBG("Encode URL = %s", uriDataIn);
const char *prefixes[] = {
"http://www.",
"https://www.",
"http://",
"https://",
};
const size_t NUM_PREFIXES = sizeof(prefixes) / sizeof(char *);
const char *suffixes[] = {
".com/",
".org/",
".edu/",
".net/",
".info/",
".biz/",
".gov/",
".com",
".org",
".edu",
".net",
".info",
".biz",
".gov"
};
const size_t NUM_SUFFIXES = sizeof(suffixes) / sizeof(char *);
sizeofURIDataOut = 0;
memset(uriDataOut, 0, sizeof(UriData_t));
if ((uriDataIn == NULL) || (strlen(uriDataIn) == 0)) {
return;
}
/*
* handle prefix
*/
for (unsigned i = 0; i < NUM_PREFIXES; i++) {
size_t prefixLen = strlen(prefixes[i]);
if (strncmp(uriDataIn, prefixes[i], prefixLen) == 0) {
uriDataOut[sizeofURIDataOut++] = i;
uriDataIn += prefixLen;
break;
}
}
/*
* handle suffixes
*/
while (*uriDataIn && (sizeofURIDataOut < URI_DATA_MAX)) {
/* check for suffix match */
unsigned i;
for (i = 0; i < NUM_SUFFIXES; i++) {
size_t suffixLen = strlen(suffixes[i]);
if (strncmp(uriDataIn, suffixes[i], suffixLen) == 0) {
uriDataOut[sizeofURIDataOut++] = i;
uriDataIn += suffixLen;
break; /* from the for loop for checking against suffixes */
}
}
/* This is the default case where we've got an ordinary character which doesn't match a suffix. */
INFO("Encoding URI: No Suffix Found");
if (i == NUM_SUFFIXES) {
uriDataOut[sizeofURIDataOut++] = *uriDataIn;
++uriDataIn;
}
}
}
};
#endif // SERVICES_EDDYSTONEBEACON_H_