microbit-dal: Revisions to MicroBitEddystone.

This commit includes the addition of comments,
some validation and corrections to C++ definitions.

Also, a minor API revision for the Eddystone class, which
simple removes Eddystone from member functions, as it
it implicit that you will be setting a URL using Eddystone
in the MicroBitEddystone class.
This commit is contained in:
James Devine 2016-11-30 10:43:53 +00:00
parent b251a59b9d
commit 95346586ab
5 changed files with 244 additions and 138 deletions

View File

@ -71,7 +71,8 @@ DEALINGS IN THE SOFTWARE.
#define MICROBIT_BLE_MAXIMUM_BONDS 4
#define MICROBIT_BLE_ENABLE_BONDING true
#define MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL 400
#define MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL 400
#define MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER 0xF0
extern const int8_t MICROBIT_BLE_POWER_LEVEL[];
@ -214,44 +215,76 @@ class MicroBitBLEManager : MicroBitComponent
*/
void stopAdvertising();
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_URL)
/**
* Starts Bluetooth advertising of Eddystone URL frames
* @param url: the url to transmit. Must be no longer than the supported eddystone url length
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-url#tx-power-level
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void advertiseEddystoneUrl(char *url, int8_t calibratedPower, bool connectable, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
/**
* Starts Bluetooth advertising of Eddystone URL frames, but accepts a ManagedString as a url. For more info see
* advertiseEddystoneUrl(char* url, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void advertiseEddystoneUrl(ManagedString url, int8_t calibratedPower, bool connectable, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
* Set the content of Eddystone URL frames
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int advertiseEddystoneUrl(const char *url, int8_t calibratedPower = MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER, bool connectable = true, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
/**
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url.
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int advertiseEddystoneUrl(ManagedString url, int8_t calibratedPower = MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER, bool connectable = true, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
#endif
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_UID)
/**
* Starts Bluetooth advertising of Eddystone UID frames
* (from the Eddystone spec) the namespace portion of the ID may be used to group a particular set of beacons, while the instance ID
* identifies individual devices in the group.
* @param uid_namespace: the uid namespace. Must 10 bytes long.
* @param uid_instance: the uid instance value. Must 6 bytes long.
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void advertiseEddystoneUid(char *uid_namespace, char *uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
* Set the content of Eddystone UID frames
*
* @param uid_namespace: the uid namespace. Must 10 bytes long.
*
* @param uid_instance: the uid instance value. Must 6 bytes long.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int advertiseEddystoneUid(const char* uid_namespace, const char* uid_instance, int8_t calibratedPower = MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER, bool connectable = true, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
/**
* Starts Bluetooth advertising of Eddystone URL frames, but accepts ManagedStrings as the uid parts. For more info see
* advertiseEddystoneUid(char* uid_namespace, char* uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void advertiseEddystoneUid(ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
* Set the content of Eddystone UID frames, but accepts a ManagedString as a namespace and instance.
*
* @param uid_namespace The namespace of the UID.
*
* @param uid_instance The value within the namespace.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int advertiseEddystoneUid(ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower = MICROBIT_BLE_EDDYSTONE_DEFAULT_POWER, bool connectable = true, uint16_t interval = MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL);
#endif
private:

View File

@ -37,8 +37,6 @@ DEALINGS IN THE SOFTWARE.
#include "MicroBitBLEManager.h"
#define MICROBIT_BLE_EDDYSTONE_URL_ADV_INTERVAL 400
/**
* Class definition for the MicroBitEddystone.
*
@ -46,62 +44,75 @@ DEALINGS IN THE SOFTWARE.
class MicroBitEddystone
{
public:
static MicroBitEddystone *getInstance();
static MicroBitEddystone* getInstance();
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_URL)
/**
* Set the content of Eddystone URL frames
* @param url: the url to transmit. Must be no longer than the supported eddystone url length
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-url#tx-power-level
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void setEddystoneUrl(BLEDevice *ble, char *url, int8_t calibratedPower);
* Set the content of Eddystone URL frames
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int setURL(BLEDevice* ble, const char *url, int8_t calibratedPower = 0xF0);
/**
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url. For more info see
* setEddystoneUrl(char* url, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void setEddystoneUrl(BLEDevice *ble, ManagedString url, int8_t calibratedPower);
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url.
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int setURL(BLEDevice* ble, ManagedString url, int8_t calibratedPower = 0xF0);
#endif
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_UID)
/**
* Set the content of Eddystone UID frames
* @param uid_namespace: the uid namespace. Must 10 bytes long.
* @param uid_instance: the uid instance value. Must 6 bytes long.
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void setEddystoneUid(BLEDevice *ble, char *uid_namespace, char *uid_instance, int8_t calibratedPower);
* Set the content of Eddystone UID frames
*
* @param uid_namespace: the uid namespace. Must 10 bytes long.
*
* @param uid_instance: the uid instance value. Must 6 bytes long.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int setUID(BLEDevice* ble, const char* uid_namespace, const char* uid_instance, int8_t calibratedPower = 0xF0);
/**
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url. For more info see
* setEddystoneUid(char* uid_namespace, char* uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void setEddystoneUid(BLEDevice *ble, ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower);
* Set the content of Eddystone UID frames, but accepts a ManagedString as a namespace and instance.
*
* @param uid_namespace The namespace of the UID.
*
* @param uid_instance The value within the namespace.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int setUID(BLEDevice* ble, ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower = 0xF0);
#endif
private:
/**
* Constructor.
*
* Configure and manage the micro:bit's Bluetooth Low Energy (BLE) stack.
*
* @param _storage an instance of MicroBitStorage used to persist sys attribute information. (This is required for compatability with iOS).
*
* @note The BLE stack *cannot* be brought up in a static context (the software simply hangs or corrupts itself).
* Hence, the init() member function should be used to initialise the BLE stack.
*/
* Private constructor.
*/
MicroBitEddystone();
static MicroBitEddystone *_instance;
};

View File

@ -49,6 +49,7 @@ set(YOTTA_AUTO_MICROBIT-DAL_CPP_FILES
"bluetooth/MicroBitBLEManager.cpp"
"bluetooth/MicroBitButtonService.cpp"
"bluetooth/MicroBitDFUService.cpp"
"bluetooth/MicroBitEddystone.cpp"
"bluetooth/MicroBitEventService.cpp"
"bluetooth/MicroBitIOPinService.cpp"
"bluetooth/MicroBitLEDService.cpp"

View File

@ -506,15 +506,20 @@ void MicroBitBLEManager::stopAdvertising()
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_URL)
/**
* Starts Bluetooth advertising of Eddystone URL frames
* @param url: the url to transmit. Must be no longer than the supported eddystone url length
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-url#tx-power-level
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void MicroBitBLEManager::advertiseEddystoneUrl(char *url, int8_t calibratedPower, bool connectable, uint16_t interval)
* Set the content of Eddystone URL frames
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitBLEManager::advertiseEddystoneUrl(const char* url, int8_t calibratedPower, bool connectable, uint16_t interval)
{
ble->gap().stopAdvertising();
ble->clearAdvertisingPayload();
@ -524,38 +529,54 @@ void MicroBitBLEManager::advertiseEddystoneUrl(char *url, int8_t calibratedPower
ble->accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
MicroBitEddystone::getInstance()->setEddystoneUrl(ble, url, calibratedPower);
int ret = MicroBitEddystone::getInstance()->setURL(ble, url, calibratedPower);
#if (MICROBIT_BLE_ADVERTISING_TIMEOUT > 0)
ble->gap().setAdvertisingTimeout(MICROBIT_BLE_ADVERTISING_TIMEOUT);
#endif
ble->gap().startAdvertising();
return ret;
}
/**
* Starts Bluetooth advertising of Eddystone URL frames, but accepts a ManagedString as a url. For more info see
* advertiseEddystoneUrl(char* url, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void advertiseEddystoneUrl(ManagedString url, int8_t calibratedPower, bool connectable, uint16_t interval)
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url.
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitBLEManager::advertiseEddystoneUrl(ManagedString url, int8_t calibratedPower, bool connectable, uint16_t interval)
{
advertiseEddystoneUrl((char *)url.toCharArray(), calibratedPower, connectable, interval);
return advertiseEddystoneUrl((char *)url.toCharArray(), calibratedPower, connectable, interval);
}
#endif
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_UID)
/**
* Starts Bluetooth advertising of Eddystone UID frames
* (from the Eddystone spec) the namespace portion of the ID may be used to group a particular set of beacons, while the instance ID
* identifies individual devices in the group.
* @param uid_namespace: the uid namespace. Must 10 bytes long.
* @param uid_instance: the uid instance value. Must 6 bytes long.
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
* @param connectable: true to keep bluetooth connectable for other services, false otherwise
* @param interval: the advertising interval of the beacon
*/
void MicroBitBLEManager::advertiseEddystoneUid(char *uid_namespace, char *uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
* Set the content of Eddystone UID frames
*
* @param uid_namespace: the uid namespace. Must 10 bytes long.
*
* @param uid_instance: the uid instance value. Must 6 bytes long.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitBLEManager::advertiseEddystoneUid(const char* uid_namespace, const char* uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
{
ble->gap().stopAdvertising();
ble->clearAdvertisingPayload();
@ -565,22 +586,35 @@ void MicroBitBLEManager::advertiseEddystoneUid(char *uid_namespace, char *uid_in
ble->accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
MicroBitEddystone::getInstance()->setEddystoneUid(ble, uid_namespace, uid_instance, calibratedPower);
int ret = MicroBitEddystone::getInstance()->setUID(ble, uid_namespace, uid_instance, calibratedPower);
#if (MICROBIT_BLE_ADVERTISING_TIMEOUT > 0)
ble->gap().setAdvertisingTimeout(MICROBIT_BLE_ADVERTISING_TIMEOUT);
#endif
ble->gap().startAdvertising();
return ret;
}
/**
* Starts Bluetooth advertising of Eddystone UID frames, but accepts a ManagedStrings as a uid args. For more info see
* advertiseEddystoneUid(char* uid_namespace, char* uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
* @return 0 for success or MICROBIT_INVALID_PARAMETER if parameters are not valid
*/
void advertiseEddystoneUid(ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
* Set the content of Eddystone UID frames, but accepts a ManagedString as a namespace and instance.
*
* @param uid_namespace The namespace of the UID.
*
* @param uid_instance The value within the namespace.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @param connectable true to keep bluetooth connectable for other services, false otherwise. (Defaults to true)
*
* @param interval the rate at which the micro:bit will advertise url frames. (Defaults to MICROBIT_BLE_EDDYSTONE_ADV_INTERVAL)
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitBLEManager::advertiseEddystoneUid(ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
{
advertiseEddystoneUid((char *)uid_namespace.toCharArray(), (char *)uid_instance.toCharArray(), calibratedPower, connectable, interval);
return advertiseEddystoneUid((char *)uid_namespace.toCharArray(), (char *)uid_instance.toCharArray(), calibratedPower, connectable, interval);
}
#endif

View File

@ -26,6 +26,8 @@ DEALINGS IN THE SOFTWARE.
#include "MicroBitConfig.h"
#include "MicroBitEddystone.h"
MicroBitEddystone *MicroBitEddystone::_instance = NULL;
/* The underlying Nordic libraries that support BLE do not compile cleanly with the stringent GCC settings we employ.
* If we're compiling under GCC, then we suppress any warnings generated from this code (but not the rest of the DAL)
* The ARM cc compiler is more tolerant. We don't test __GNUC__ here to detect GCC as ARMCC also typically sets this
@ -44,8 +46,6 @@ DEALINGS IN THE SOFTWARE.
#pragma GCC diagnostic pop
#endif
MicroBitEddystone *MicroBitEddystone::_instance;
const uint8_t EDDYSTONE_UUID[] = {0xAA, 0xFE};
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_URL)
@ -77,33 +77,34 @@ MicroBitEddystone::MicroBitEddystone()
{
}
MicroBitEddystone *MicroBitEddystone::getInstance()
MicroBitEddystone* MicroBitEddystone::getInstance()
{
if (_instance == 0)
{
_instance = new MicroBitEddystone;
}
return _instance;
}
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_URL)
/**
* Set the content of Eddystone URL frames
* @param url: the url to transmit. Must be no longer than the supported eddystone url length
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-url#tx-power-level
*/
void MicroBitEddystone::setEddystoneUrl(BLEDevice *ble, char *url, int8_t calibratedPower)
* Set the content of Eddystone URL frames
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitEddystone::setURL(BLEDevice* ble, const char* url, int8_t calibratedPower)
{
int urlDataLength = 0;
char urlData[EDDYSTONE_URL_MAX_LENGTH];
memset(urlData, 0, EDDYSTONE_URL_MAX_LENGTH);
if ((url == NULL) || (strlen(url) == 0))
{
return;
}
if (url == NULL || strlen(url) == 0)
return MICROBIT_INVALID_PARAMETER;
// Prefix
for (size_t i = 0; i < EDDYSTONE_URL_PREFIXES_LENGTH; i++)
@ -150,29 +151,45 @@ void MicroBitEddystone::setEddystoneUrl(BLEDevice *ble, char *url, int8_t calibr
ble->accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, EDDYSTONE_UUID, sizeof(EDDYSTONE_UUID));
ble->accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, rawFrame, index + urlDataLength);
return MICROBIT_OK;
}
/**
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url. For more info see
* setEddystoneUrl(char* url, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void setEddystoneUrl(BLEDevice *ble, ManagedString url, int8_t calibratedPower)
* Set the content of Eddystone URL frames, but accepts a ManagedString as a url.
*
* @param url The url to broadcast
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitEddystone::setURL(BLEDevice* ble, ManagedString url, int8_t calibratedPower)
{
setEddystoneUrl(ble, (char *)url.toCharArray(), calibratedPower);
return setURL(ble, (char *)url.toCharArray(), calibratedPower);
}
#endif
#if CONFIG_ENABLED(MICROBIT_BLE_EDDYSTONE_UID)
/**
* Set the content of Eddystone UID frames
* @param uid_namespace: the uid namespace. Must 10 bytes long.
* @param uid_instance: the uid instance value. Must 6 bytes long.
* @param calibratedPower: the calibrated to transmit at. This is the received power at 0 meters in dBm.
* The value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
void MicroBitEddystone::setEddystoneUid(BLEDevice *ble, char *uid_namespace, char *uid_instance, int8_t calibratedPower)
* Set the content of Eddystone UID frames
*
* @param uid_namespace: the uid namespace. Must 10 bytes long.
*
* @param uid_instance: the uid instance value. Must 6 bytes long.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitEddystone::setUID(BLEDevice* ble, const char* uid_namespace, const char* uid_instance, int8_t calibratedPower)
{
if (uid_namespace == NULL || strlen(uid_namespace) == 0 || uid_instance == NULL || strlen(uid_instance) == 0)
return MICROBIT_INVALID_PARAMETER;
char uidData[EDDYSTONE_UID_NAMESPACE_MAX_LENGTH + EDDYSTONE_UID_INSTANCE_MAX_LENGTH];
// UID namespace
@ -191,15 +208,25 @@ void MicroBitEddystone::setEddystoneUid(BLEDevice *ble, char *uid_namespace, cha
ble->accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, EDDYSTONE_UUID, sizeof(EDDYSTONE_UUID));
ble->accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, rawFrame, index + EDDYSTONE_UID_NAMESPACE_MAX_LENGTH + EDDYSTONE_UID_INSTANCE_MAX_LENGTH);
return MICROBIT_OK;
}
/**
* Set the content of Eddystone UID frames, but accepts ManagedStrings as a uid args. For more info see
* setEddystoneUid(char* uid_namespace, char* uid_instance, int8_t calibratedPower, bool connectable, uint16_t interval)
*/
void MicroBitEddystone::setEddystoneUid(BLEDevice *ble, ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower)
* Set the content of Eddystone UID frames, but accepts a ManagedString as a namespace and instance.
*
* @param uid_namespace The namespace of the UID.
*
* @param uid_instance The value within the namespace.
*
* @param calibratedPower the transmission range of the beacon (Defaults to: 0xF0 ~10m).
*
* @note The calibratedPower value ranges from -100 to +20 to a resolution of 1. The calibrated power should be binary encoded.
* More information can be found at https://github.com/google/eddystone/tree/master/eddystone-uid#tx-power
*/
int MicroBitEddystone::setUID(BLEDevice* ble, ManagedString uid_namespace, ManagedString uid_instance, int8_t calibratedPower)
{
setEddystoneUid(ble, (char *)uid_namespace.toCharArray(), (char *)uid_instance.toCharArray(), calibratedPower);
return setUID(ble, (char *)uid_namespace.toCharArray(), (char *)uid_instance.toCharArray(), calibratedPower);
}
#endif