#ifndef MICROBIT_PIN_H #define MICROBIT_PIN_H #include "MicroBitComponent.h" #include "mbed.h" // Status Field flags... #define IO_STATUS_DIGITAL_IN 0x01 // Pin is configured as a digital input, with no pull up. #define IO_STATUS_DIGITAL_OUT 0x02 // Pin is configured as a digital output #define IO_STATUS_ANALOG_IN 0x04 // Pin is Analog in #define IO_STATUS_ANALOG_OUT 0x08 // Pin is Analog out (not currently possible) #define IO_STATUS_TOUCH_IN 0x10 // Pin is a makey-makey style touch sensor #define IO_STATUS_EVENTBUS_ENABLED 0x80 // Pin is will generate events on change //#defines for each edge connector pin #define MICROBIT_PIN_P0 P0_3 //P0 is the left most pad (ANALOG/DIGITAL) used to be P0_3 on green board #define MICROBIT_PIN_P1 P0_2 //P1 is the middle pad (ANALOG/DIGITAL) #define MICROBIT_PIN_P2 P0_1 //P2 is the right most pad (ANALOG/DIGITAL) used to be P0_1 on green board #define MICROBIT_PIN_P3 P0_4 //COL1 (ANALOG/DIGITAL) #define MICROBIT_PIN_P4 P0_17 //BTN_A #define MICROBIT_PIN_P5 P0_5 //COL2 (ANALOG/DIGITAL) #define MICROBIT_PIN_P6 P0_14 //ROW2 #define MICROBIT_PIN_P7 P0_13 //ROW1 #define MICROBIT_PIN_P8 P0_18 //PIN 18 #define MICROBIT_PIN_P9 P0_15 //ROW3 #define MICROBIT_PIN_P10 P0_6 //COL3 (ANALOG/DIGITAL) #define MICROBIT_PIN_P11 P0_26 //BTN_B #define MICROBIT_PIN_P12 P0_20 //PIN 20 #define MICROBIT_PIN_P13 P0_23 //SCK #define MICROBIT_PIN_P14 P0_22 //MISO #define MICROBIT_PIN_P15 P0_21 //MOSI #define MICROBIT_PIN_P16 P0_16 //PIN 16 #define MICROBIT_PIN_P19 P0_0 //SCL #define MICROBIT_PIN_P20 P0_30 //SDA #define MICROBIT_PIN_MAX_OUTPUT 1023 /** * Pin capabilities enum. * Used to determine the capabilities of each Pin as some can only be digital, or can be both digital and analogue. */ enum PinCapability{ PIN_CAPABILITY_DIGITAL = 0x01, PIN_CAPABILITY_ANALOG = 0x02, PIN_CAPABILITY_TOUCH = 0x04, PIN_CAPABILITY_AD = PIN_CAPABILITY_DIGITAL | PIN_CAPABILITY_ANALOG, PIN_CAPABILITY_ALL = PIN_CAPABILITY_DIGITAL | PIN_CAPABILITY_ANALOG | PIN_CAPABILITY_TOUCH }; /** * Class definition for MicroBitPin. * * Represents a I/O on the edge connector. */ class MicroBitPin : public MicroBitComponent { /** * Unique, enumerated ID for this component. * Used to track asynchronous events in the event bus. */ void *pin; // The mBed object looking after this pin at any point in time (may change!). PinCapability capability; /** * Disconnect any attached mBed IO from this pin. * Used only when pin changes mode (i.e. Input/Output/Analog/Digital) */ void disconnect(); public: PinName name; // mBed pin name of this pin. /** * Constructor. * Create a Button representation with the given ID. * @param id the ID of the new Pin object. * @param name the pin name for this MicroBitPin instance to represent * @param capability the capability of this pin, can it only be digital? can it only be analog? can it be both? * * Example: * @code * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH); * @endcode */ MicroBitPin(int id, PinName name, PinCapability capability); /** * Configures this IO pin as a digital output (if necessary) and sets the pin to 'value'. * @param value 0 (LO) or 1 (HI) * * Example: * @code * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH); * P0.setDigitalValue(1); // P0 is now HI! * @endcode */ void setDigitalValue(int value); /** * Configures this IO pin as a digital input (if necessary) and tests its current value. * @return 1 if this input is high, 0 otherwise. * * Example: * @code * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH); * P0.getDigitalValue(); // P0 is either 0 or 1; * @endcode */ int getDigitalValue(); /** * Configures this IO pin as an analogue output (if necessary and possible). * Change the DAC value to the given level. * @param value the level to set on the output pin, in the range 0..??? * @note NOT IN USE, but may exist in the future if we do some clever rejigging! :) */ void setAnalogValue(int value); /** * Configures this IO pin as an analogue input (if necessary and possible). * @return the current analogue level on the pin, in the range 0-0xFFFF * * Example: * @code * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH); * P0.getAnalogValue(); // P0 is a value in the range of 0 - 0xFFFF * @endcode */ int getAnalogValue(); /** * Configures this IO pin as a makey makey style touch sensor (if necessary) and tests its current debounced state. * @return 1 if pin is touched, 0 otherwise. * * Example: * @code * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_ALL); * if(P0.isTouched()) * { * uBit.display.clear(); * } * @endcode */ int isTouched(); /** * Configures the PWM period of the analog output to the given value. * If this pin is not configured as an analog output, the operation * has no effect. * * @param period The new period for the analog output in milliseconds. */ void setAnalogPeriod(int period); }; #endif