nrf51822/nRF51GattServer.cpp

322 lines
12 KiB
C++
Raw Normal View History

2014-07-30 10:36:32 +00:00
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "nRF51GattServer.h"
#include "mbed.h"
#include "common/common.h"
#include "btle/custom/custom_helper.h"
#include "nRF51Gap.h"
/**************************************************************************/
/*!
@brief Adds a new service to the GATT table on the peripheral
@returns ble_error_t
@retval BLE_ERROR_NONE
Everything executed properly
@section EXAMPLE
@code
@endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::addService(GattService &service)
{
/* ToDo: Make sure we don't overflow the array, etc. */
/* ToDo: Make sure this service UUID doesn't already exist (?) */
/* ToDo: Basic validation */
/* Add the service to the nRF51 */
ble_uuid_t nordicUUID;
nordicUUID = custom_convert_to_nordic_uuid(service.getUUID());
uint16_t serviceHandle;
ASSERT( ERROR_NONE ==
sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
&nordicUUID,
&serviceHandle),
BLE_ERROR_PARAM_OUT_OF_RANGE );
service.setHandle(serviceHandle);
/* Add characteristics to the service */
for (uint8_t i = 0; i < service.getCharacteristicCount(); i++) {
GattCharacteristic *p_char = service.getCharacteristic(i);
nordicUUID = custom_convert_to_nordic_uuid(p_char->getValueAttribute().getUUID());
2014-07-30 10:36:32 +00:00
ASSERT ( ERROR_NONE ==
custom_add_in_characteristic(BLE_GATT_HANDLE_INVALID,
2014-07-30 10:36:32 +00:00
&nordicUUID,
p_char->getProperties(),
p_char->getValueAttribute().getValuePtr(),
p_char->getValueAttribute().getInitialLength(),
p_char->getValueAttribute().getMaxLength(),
2014-07-30 10:36:32 +00:00
&nrfCharacteristicHandles[characteristicCount]),
BLE_ERROR_PARAM_OUT_OF_RANGE );
/* Update the characteristic handle */
uint16_t charHandle = characteristicCount;
p_characteristics[characteristicCount++] = p_char;
p_char->getValueAttribute().setHandle(charHandle);
/* Add optional descriptors if any */
/* ToDo: Make sure we don't overflow the array */
for (uint8_t j = 0; j < p_char->getDescriptorCount(); j++) {
GattAttribute *p_desc = p_char->getDescriptor(j);
nordicUUID = custom_convert_to_nordic_uuid(p_desc->getUUID());
ASSERT ( ERROR_NONE ==
custom_add_in_descriptor(BLE_GATT_HANDLE_INVALID,
&nordicUUID,
p_desc->getValuePtr(),
p_desc->getInitialLength(),
p_desc->getMaxLength(),
&nrfDescriptorHandles[descriptorCount]),
BLE_ERROR_PARAM_OUT_OF_RANGE );
uint16_t descHandle = descriptorCount;
p_descriptors[descriptorCount++] = p_desc;
p_desc->setHandle(descHandle);
2014-07-30 10:36:32 +00:00
}
2014-07-30 10:36:32 +00:00
}
serviceCount++;
return BLE_ERROR_NONE;
}
/**************************************************************************/
/*!
@brief Reads the value of a characteristic, based on the service
and characteristic index fields
@param[in] charHandle
The handle of the GattCharacteristic to read from
@param[in] buffer
Buffer to hold the the characteristic's value
(raw byte array in LSB format)
@param[in] len
The number of bytes read into the buffer
@returns ble_error_t
@retval BLE_ERROR_NONE
Everything executed properly
@section EXAMPLE
@code
@endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::readValue(uint16_t charHandle, uint8_t buffer[], uint16_t *const lengthP)
{
ASSERT( ERROR_NONE ==
sd_ble_gatts_value_get(nrfCharacteristicHandles[charHandle].value_handle, 0, lengthP, buffer),
BLE_ERROR_PARAM_OUT_OF_RANGE);
return BLE_ERROR_NONE;
}
/**************************************************************************/
/*!
@brief Updates the value of a characteristic, based on the service
and characteristic index fields
@param[in] charHandle
The handle of the GattCharacteristic to write to
@param[in] buffer
Data to use when updating the characteristic's value
(raw byte array in LSB format)
@param[in] len
The number of bytes in buffer
@returns ble_error_t
@retval BLE_ERROR_NONE
Everything executed properly
@section EXAMPLE
@code
@endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::updateValue(uint16_t charHandle, uint8_t buffer[], uint16_t len, bool localOnly)
{
uint16_t gapConnectionHandle = nRF51Gap::getInstance().getConnectionHandle();
if (localOnly) {
/* Only update locally regardless of notify/indicate */
ASSERT_INT( ERROR_NONE,
sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
BLE_ERROR_PARAM_OUT_OF_RANGE );
return BLE_ERROR_NONE;
}
if ((p_characteristics[charHandle]->getProperties() &
(GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE |
GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
(gapConnectionHandle != BLE_CONN_HANDLE_INVALID)) {
/* HVX update for the characteristic value */
ble_gatts_hvx_params_t hvx_params;
hvx_params.handle = nrfCharacteristicHandles[charHandle].value_handle;
hvx_params.type =
(p_characteristics[charHandle]->getProperties() &
GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) ?
BLE_GATT_HVX_NOTIFICATION : BLE_GATT_HVX_INDICATION;
hvx_params.offset = 0;
hvx_params.p_data = buffer;
hvx_params.p_len = &len;
error_t error = (error_t) sd_ble_gatts_hvx(gapConnectionHandle, &hvx_params);
/* ERROR_INVALID_STATE, ERROR_BUSY, ERROR_GATTS_SYS_ATTR_MISSING and
*ERROR_NO_TX_BUFFERS the ATT table has been updated. */
if ((error != ERROR_NONE) && (error != ERROR_INVALID_STATE) &&
(error != ERROR_BLE_NO_TX_BUFFERS) && (error != ERROR_BUSY) &&
(error != ERROR_BLEGATTS_SYS_ATTR_MISSING)) {
ASSERT_INT( ERROR_NONE,
sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
BLE_ERROR_PARAM_OUT_OF_RANGE );
}
} else {
ASSERT_INT( ERROR_NONE,
sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
BLE_ERROR_PARAM_OUT_OF_RANGE );
}
return BLE_ERROR_NONE;
}
ble_error_t nRF51GattServer::setDeviceName(const uint8_t *deviceName)
{
ble_gap_conn_sec_mode_t sec_mode;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); // no security is needed
if (sd_ble_gap_device_name_set(&sec_mode, deviceName, strlen((const char *)deviceName)) == NRF_SUCCESS) {
return BLE_ERROR_NONE;
} else {
return BLE_ERROR_PARAM_OUT_OF_RANGE;
}
}
ble_error_t nRF51GattServer::getDeviceName(uint8_t *deviceName, unsigned *lengthP)
{
if (sd_ble_gap_device_name_get(deviceName, (uint16_t *)lengthP) == NRF_SUCCESS) {
return BLE_ERROR_NONE;
} else {
return BLE_ERROR_PARAM_OUT_OF_RANGE;
}
}
ble_error_t nRF51GattServer::setAppearance(uint16_t appearance)
{
if (sd_ble_gap_appearance_set(appearance) == NRF_SUCCESS) {
return BLE_ERROR_NONE;
} else {
return BLE_ERROR_PARAM_OUT_OF_RANGE;
}
}
ble_error_t nRF51GattServer::getAppearance(uint16_t *appearanceP)
{
if (sd_ble_gap_appearance_get(appearanceP)) {
return BLE_ERROR_NONE;
} else {
return BLE_ERROR_PARAM_OUT_OF_RANGE;
}
}
/**************************************************************************/
/*!
@brief Callback handler for events getting pushed up from the SD
*/
/**************************************************************************/
void nRF51GattServer::hwCallback(ble_evt_t *p_ble_evt)
{
uint16_t handle_value;
GattServerEvents::gattEvent_t event;
switch (p_ble_evt->header.evt_id) {
case BLE_GATTS_EVT_WRITE:
/* There are 2 use case here: Values being updated & CCCD (indicate/notify) enabled */
/* 1.) Handle CCCD changes */
handle_value = p_ble_evt->evt.gatts_evt.params.write.handle;
for (uint8_t i = 0; i<characteristicCount; i++) {
if ((p_characteristics[i]->getProperties() & (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
(nrfCharacteristicHandles[i].cccd_handle == handle_value)) {
uint16_t cccd_value =
(p_ble_evt->evt.gatts_evt.params.write.data[1] << 8) |
p_ble_evt->evt.gatts_evt.params.write.data[0]; /* Little Endian but M0 may be mis-aligned */
if (((p_characteristics[i]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE) && (cccd_value & BLE_GATT_HVX_INDICATION)) ||
((p_characteristics[i]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) && (cccd_value & BLE_GATT_HVX_NOTIFICATION))) {
event = GattServerEvents::GATT_EVENT_UPDATES_ENABLED;
} else {
event = GattServerEvents::GATT_EVENT_UPDATES_DISABLED;
}
handleEvent(event, i);
return;
}
}
/* 2.) Changes to the characteristic value will be handled with other events below */
event = GattServerEvents::GATT_EVENT_DATA_WRITTEN;
break;
case BLE_EVT_TX_COMPLETE:
for (uint8_t i = 0; i<p_ble_evt->evt.common_evt.params.tx_complete.count; i++){
handleEvent(GattServerEvents::GATT_EVENT_DATA_SENT);
}
2014-07-30 10:36:32 +00:00
return;
case BLE_GATTS_EVT_HVC:
/* Indication confirmation received */
event = GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED;
handle_value = p_ble_evt->evt.gatts_evt.params.hvc.handle;
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
sd_ble_gatts_sys_attr_set(p_ble_evt->evt.gatts_evt.conn_handle, NULL, 0);
return;
default:
return;
}
/* Find index (charHandle) in the pool */
for (uint8_t i = 0; i<characteristicCount; i++) {
if (nrfCharacteristicHandles[i].value_handle == handle_value) {
handleEvent(event, i);
break;
}
}
}